Martinigirl Posted June 24, 2017 Share Posted June 24, 2017 5 hours ago, DancingHoskuld said: Unfortunately I lost all my engram points as well. So here I am at level 20 with no engrams learnt and only 20 points to spend on learning engrams. This is single player. edit turns out it is a problem with primitive+ not the base ark. 5 hours ago, DancingHoskuld said: Unfortunately I lost all my engram points as well. So here I am at level 20 with no engrams learnt and only 20 points to spend on learning engrams. This is single player. edit turns out it is a problem with primitive+ not the base ark. I did not get any levels back and I have no points to spend at all. I am level 50-ish and I will not level quickly either. I am also playing primitive plus. I hope this will get fixed soon. Link to comment Share on other sites More sharing options...
Administrator Jatheish Posted June 24, 2017 Author Administrator Share Posted June 24, 2017 4 hours ago, Remus1911 said: I travelled around, only saw a few dinosaurs. Have you adjusted the dino count on single player? The value in the INI is DinoCountMultiplier=0.031000. Hmm. I'll have someone check it out. If you were to run with -preventhibernation and clear wild dinos, how does that compare? Link to comment Share on other sites More sharing options...
Ihmislehma Posted June 24, 2017 Share Posted June 24, 2017 1 hour ago, Jat said: Has my email come through? Link to comment Share on other sites More sharing options...
MurjyFranky Posted June 24, 2017 Share Posted June 24, 2017 ok. Link to comment Share on other sites More sharing options...
micky100 Posted June 24, 2017 Share Posted June 24, 2017 17 hours ago, Jat said: Right click ARK in your Steam Library, Go to properties, Launch Options, and type -preventhibernation and then you can launch the game. Can you tell me what map you're playing on? And maybe some rough areas of where you're looking, I want to see if I can reproduce it. yeah that didnt work,now everything else has despawned too.Not much fun flying round an empty map so i guess i will play something else till you fix your broken game. It was a good game too till all the animals disappeared Apart from the ones in the caves which is just my luck Link to comment Share on other sites More sharing options...
Remus1911 Posted June 24, 2017 Share Posted June 24, 2017 6 hours ago, Jat said: Hmm. I'll have someone check it out. If you were to run with -preventhibernation and clear wild dinos, how does that compare? I have tried, with identical results. Changing the DinoCountMultiplier value to 1.0 seems to have fixed the spawning problem. Thank you for your help, exemplary support Jat! Link to comment Share on other sites More sharing options...
DromaeoSapiens Posted June 24, 2017 Share Posted June 24, 2017 Yup, sad to say I'm having the same problem. Just did a DestroyWildDinos on The Island (singleplayer) and traveled around the southern coastline and a little bit of the east coast, and it's eerily lifeless if even apocalyptic in a way. I had changed the difficulty level from ~0.6 to 0.8 just before doing the wipe, in case that might factor in. "No birds, no animals...nothing." -Alien Covenant Link to comment Share on other sites More sharing options...
LordWex Posted June 25, 2017 Share Posted June 25, 2017 9 hours ago, DromaeoSapiens said: Yup, sad to say I'm having the same problem. Just did a DestroyWildDinos on The Island (singleplayer) and traveled around the southern coastline and a little bit of the east coast, and it's eerily lifeless if even apocalyptic in a way. I had changed the difficulty level from ~0.6 to 0.8 just before doing the wipe, in case that might factor in. "No birds, no animals...nothing." -Alien Covenant After experiencing similar issues,I had to remain in a specific area for maybe 20-30 seconds and I started seeing a large population of dinosaurs pop up (dino count hadn't been changed from 1.0). I will note that when I started to see the dinos spawning in was generally after I had started to farm mats. So try hitting a tree or two up to see if it affects whether you're seeing spawns. Main issue I'm seeing that wasn't happening before hibernation now is that my crystal nodes aren't respawning after being farmed (been on Ark for around 6-8 hours today). Link to comment Share on other sites More sharing options...
MichellePlaysGames Posted June 25, 2017 Share Posted June 25, 2017 I'm having the opposite problem, I've turned the dino count multiplier way, way down, but I still have 35k dino's spawning, after several wipes. It's on the Ragnarok Map, though, not The Island. Link to comment Share on other sites More sharing options...
DromaeoSapiens Posted June 25, 2017 Share Posted June 25, 2017 8 hours ago, LordWex said: After experiencing similar issues,I had to remain in a specific area for maybe 20-30 seconds and I started seeing a large population of dinosaurs pop up (dino count hadn't been changed from 1.0). I will note that when I started to see the dinos spawning in was generally after I had started to farm mats. So try hitting a tree or two up to see if it affects whether you're seeing spawns. Main issue I'm seeing that wasn't happening before hibernation now is that my crystal nodes aren't respawning after being farmed (been on Ark for around 6-8 hours today). I'll give that a go, thank you. Also, I found that if you change the resource respawn period way down, crystals will respawn. I can't remember if I set it to 0 or not though so you may have to fiddle with it. I can't guarantee it'll even work at all either. Link to comment Share on other sites More sharing options...
HunterLock19 Posted June 25, 2017 Share Posted June 25, 2017 Hello just made this account to post here Also having an issues with spawning dinos in single player ( or lack there of ) Playing on Ragnarok map Have 3 mods ( Structures + , Super Spyglass , Gecko Custom Supply Drops ( last one was added after the problem started ) I have tryed a few fixs noted in steam forums like increasing dino count or unchecking the single player settings as well as turning off Hibernation From what i can see a relog of any kind will kinda work at first but only for your current area start moving around and you will see less and less spawns Ocean dinos seem to be affected as well not just land flyers seem to be fine as well as coal in water everything else is ether gone or you might find 1 you can as said above get some dinos back by reloging but the issue will come back shortly Link to comment Share on other sites More sharing options...
DromaeoSapiens Posted June 25, 2017 Share Posted June 25, 2017 9 hours ago, LordWex said: After experiencing similar issues,I had to remain in a specific area for maybe 20-30 seconds and I started seeing a large population of dinosaurs pop up (dino count hadn't been changed from 1.0). I will note that when I started to see the dinos spawning in was generally after I had started to farm mats. So try hitting a tree or two up to see if it affects whether you're seeing spawns. Main issue I'm seeing that wasn't happening before hibernation now is that my crystal nodes aren't respawning after being farmed (been on Ark for around 6-8 hours today). Sadly i've tried what you had suggest and am not getting any results. I have my game running in the background right know to see if it just takes more time, but so far nothing. Link to comment Share on other sites More sharing options...
LordWex Posted June 25, 2017 Share Posted June 25, 2017 1 hour ago, DromaeoSapiens said: I'll give that a go, thank you. Also, I found that if you change the resource respawn period way down, crystals will respawn. I can't remember if I set it to 0 or not though so you may have to fiddle with it. I can't guarantee it'll even work at all either. I have tried your suggestion, it has indeed worked for some locations but not for others (despite being visited AFTER than one specific spot). I have found that the particular spot where crystal is respawning significantly slowly if not at all is the small hill/mountain where edmund rockwell #22 is found. Only one specific crystal rock has respawned there and it's done it twice now. 10 minutes ago, DromaeoSapiens said: Sadly i've tried what you had suggest and am not getting any results. I have my game running in the background right know to see if it just takes more time, but so far nothing. My next bit of advice would be to try switching between a non-dedicated session and then a singleplayer (or vice versa depending on which you do normally) as I often do this to play with friends and then conserve resources on my laptop when it's not necessary to host a non-dedicated session. After that before launching ARK use -preventhibernation to attempt to coax out the dino spawns. DO NOT destroywilddinos after, wait for a short period, it *should* repopulate the game during this time, at which you can once again remove -preventhibernation and run it normally. Other settings I generally use just incase this can help you at all: Difficultyoffset - 1.0 OverrideOfficialDifficulty - 5.0 (through gameusersettings.ini) MaxDifficulty - True UseSinglePlayerSettings - True EnablePvPGamma - False ResourceNoReplenishRadiusPlayers=0.4 ResourceNoReplenishRadiusStructures=0.4 Whether the last two have any affect on dino spawns I doubt it, but these are all the settings I have changed since the particular patch. Maybe checking those could help you to try to reproduce the better luck I've had. Link to comment Share on other sites More sharing options...
DromaeoSapiens Posted June 25, 2017 Share Posted June 25, 2017 34 minutes ago, LordWex said: I have tried your suggestion, it has indeed worked for some locations but not for others (despite being visited AFTER than one specific spot). I have found that the particular spot where crystal is respawning significantly slowly if not at all is the small hill/mountain where edmund rockwell #22 is found. Only one specific crystal rock has respawned there and it's done it twice now. The one by the red Obelisk? That's the only spot I go to for getting my crystals so unfortunately I can't say much about other areas of the island. Though they apparently added a butt ton of the stuff into caves in this patch. 34 minutes ago, LordWex said: My next bit of advice would be to try switching between a non-dedicated session and then a singleplayer (or vice versa depending on which you do normally) as I often do this to play with friends and then conserve resources on my laptop when it's not necessary to host a non-dedicated session. After that before launching ARK use -preventhibernation to attempt to coax out the dino spawns. DO NOT destroywilddinos after, wait for a short period, it *should* repopulate the game during this time, at which you can once again remove -preventhibernation and run it normally. I exclusively play singleplayer and have never hosted a non-dedi or went on multiplayer. I've heard on this topic that preventhibernation has been causing crashes, so I've been a little hesitant to do so. As for settings, I do have a number of them change, so maybe resetting them all to default might help. I'm tempted to wait until the next major patch rolls out soon to see if it's been addressed. Link to comment Share on other sites More sharing options...
Graviphoton Posted June 26, 2017 Share Posted June 26, 2017 I faced the same problem with under/no-spawning in singleplayer - my solution is Singleplayer Settings=Off, Dino Count=1 and -preventhibernation in startup. Otherwise there were only several animals around the base and empty plains and empty beaches and empty seabed and empty sea elsewhere... for example I searched for Trilobites and after killing 5 of them I could not find any other. After using command "getallstate Trilobite_Character_C" it showed none in game. Link to comment Share on other sites More sharing options...
PaleoJoe Posted June 26, 2017 Share Posted June 26, 2017 On 6/22/2017 at 0:48 PM, Chewytowel said: I've found it a bit hard to find the right balance between cuddle interval and the baby speed multiplier. Is there a tool or a way to make it easier to make sure I can get a 100% imprint on whatever I am breeding in SP? I find the relationship between the cuddle interval and mature speed difficult to manage in relation to how often I can imprint a dino (it takes a lot of closing and restarting to try and get it at a decent spot). I think the command is SetImprintMultiplier XXX for what % you want on the targeted dino. That way you can just set the raising to 9999 and set the imprint to 100%. Saves you time. Link to comment Share on other sites More sharing options...
jamesbondtiger Posted June 27, 2017 Share Posted June 27, 2017 Every update means need a new update to fix the last update bugs Link to comment Share on other sites More sharing options...
Hotsoups Posted June 28, 2017 Share Posted June 28, 2017 I have tried everything, but nothing has helped. I have tried the -preventhibernation preload setup. I even unchecked single player status, but yet i cant get a thing to load, not a single dino or fish. its just me stranded on an island with sticks and rocks to throw in the water because theres nothing to kill to be eaten by. I enjoy my daily getting eaten by dinosuars but this is severally reducing that. How can i get eaten by dinos, if there are no dinos, or aquatic friends that i may spear and feast upon a good day of eatiery. Link to comment Share on other sites More sharing options...
CtB Posted June 29, 2017 Share Posted June 29, 2017 On 6/24/2017 at 11:38 PM, Jat said: Hmm. I'll have someone check it out. If you were to run with -preventhibernation and clear wild dinos, how does that compare? Thank you. -preventhibernation appears to have solved the problem for me. Link to comment Share on other sites More sharing options...
OXStrident Posted June 29, 2017 Share Posted June 29, 2017 Is the preventhibernation parameter not doing much for anyone? The map is still barren, and even after traveling for a half hour on Ragnarok, I'm seeing almost no creatures. Link to comment Share on other sites More sharing options...
LordWex Posted June 30, 2017 Share Posted June 30, 2017 Unsure of where to ask this, but as this is the Singleplayer settings thread, figured I'd ask here - Can we please get an estimate of the Crop Growth Multiplier and Beer Barrel speeds for the Singleplayer settings? Just so we know how much some of us may have to reduce crop growth to avoid instantaneous crops. Thank you. Link to comment Share on other sites More sharing options...
Chewytowel Posted June 30, 2017 Share Posted June 30, 2017 I was wondering something. Does disabling single player settings turn off the boss nerfs so you can fight a boss like you would on a dedicated server? That would be a nice option to easily be able to enable or disable whenever I chose. Link to comment Share on other sites More sharing options...
aethersin Posted June 30, 2017 Share Posted June 30, 2017 mmmmm hibernation Link to comment Share on other sites More sharing options...
Orsini Posted July 1, 2017 Share Posted July 1, 2017 Perhaps this is just me so far... but the singleplayersettings turned on by default for my dedicated server. This post does not mention that. Every. Single. Player. that logged into my dedicated server and became level 100 is now stuck at level 100. Is there a fix? Is there an admin command I can revert someone's XP? Or did my server just grow with 45+ level 100 characters. FYI, we're a "vanilla" server, meaning things are set to default. Being level 100 is the exact opposite of what we'd like to do. Please help. Link to comment Share on other sites More sharing options...
Judqment8 Posted July 1, 2017 Share Posted July 1, 2017 Is there a separate setting for the "boss nerfs" option? The single player settings seem to completely mess up my carefully edited dino stats so I rather not use them on my server. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.