PhantomX Posted September 26, 2016 Share Posted September 26, 2016 On 9/19/2016 at 5:35 PM, Snowball said: The iissue I found was that Commander had updated the database to allow for Scorched Earth and added in some columns. It means that the older Commander versions reference the wrong excel cells, as the data had moved in the excel file. If you update commander the the latest version 1.0.5.3, it should then work. I only realised because I put my frequently used mod commands in the entities file, as the mod tab doesn't show all the mods I have. So I have to backup that file (entities) and then when the db updates, I just copy and paste my own custom mod commands into the bottom of the new entities file Thx for the reply, but unfortunately now I cannot play ark. Keep getting unknown module errors and Loader Errors or as long as I stand still it runs fine but move and I go from 55Frames to 4 unless I use playersonly at which point I can move freely. Yes, I have gone through with no mods and through my mods, uninstalled/reinstalled and verified and Yes I can run the game at Epic settings, even have this issue on low settings usually keep on mid settings.. .So I can say yes that fixed the problem for the amount of time I was able to play SP, but now I cannot even get through the launch Single Player menu now. I'm this close to saying the hell with it and uninstalling and waiting till closer to release. Good luck on your project. Link to comment Share on other sites More sharing options...
Theocrates Posted September 27, 2016 Share Posted September 27, 2016 On 9/26/2016 at 0:15 AM, PhantomX said: Thx for the reply, but unfortunately now I cannot play ark. Keep getting unknown module errors and Loader Errors or as long as I stand still it runs fine but move and I go from 55Frames to 4 unless I use playersonly at which point I can move freely. Yes, I have gone through with no mods and through my mods, uninstalled/reinstalled and verified and Yes I can run the game at Epic settings, even have this issue on low settings usually keep on mid settings.. .So I can say yes that fixed the problem for the amount of time I was able to play SP, but now I cannot even get through the launch Single Player menu now. I'm this close to saying the hell with it and uninstalling and waiting till closer to release. Good luck on your project. This very much sounds like a corruption error where files have been overwritten and/or misplaced. When you did your verification of files etc did you clear out the game.ini and gameusersettings.ini files? Have you pulled everything from the mod files in the steam directory for the game? Link to comment Share on other sites More sharing options...
iSpeZz Posted September 27, 2016 Share Posted September 27, 2016 Ark Steampunk mod needs updating https://docs.google.com/spreadsheets/d/194RpLUB7tSzhEA5blZ3Uck5C8UiqMI3s7CnF4HDK6-c/edit?usp=sharing Link to comment Share on other sites More sharing options...
PhantomX Posted September 30, 2016 Share Posted September 30, 2016 @Theocrates Yeah, removed all mods and let them reinstall then verified Game, one of the errors occurred, uninstalled then reinstalled. one of the errors occurs. Like I said it one of them that occurs and isnt consistent in the errors. Really wish there was a more informative crash logs so I can track it down myself. I think what it is might be an update messing with a mod or vice versa. But, it take SO long to get into SP and the game has been really weird as of late graphically. I'll be looking at a dino, structure, or element in the game and the texture and model would be high then switches to low res texture and model and streams back into the high quality. It puts a good strain on the computer when it does this. Yes I know there is a setting for something Occlusion, when your not looking at something for it lower the quality, but that shouldnt be happening when I'm looking at it or within a certain distiance from me. Plus, in SP without mods if I crouch while on structures I become stuck or if I run I suddenly act as though I hit a wall or bounce up a bit. I dont know anymore, I get the feeling they are trying to make SP harder to play unless you have two computers, one to run the server and one as client. I cant even move after loading for a good bit without me going from 50 to 2 fps and if it is doing a "stream" I dont lose frames unless I move. But, thanks for the reply tho Link to comment Share on other sites More sharing options...
DarkHawk Posted October 9, 2016 Share Posted October 9, 2016 anyone else missing the List of Dinos in Spawn and Spawn Actor Spread? Link to comment Share on other sites More sharing options...
sparcmx Posted October 12, 2016 Author Share Posted October 12, 2016 Commander Mods Updated ARK Steampunk Mod Castles, Keeps and Forts Architecture Platforms Plus Commander Mods Added Advanced Rafts Compiled by R8zor Landscape Blocks Compiled by R8zor Medieval Structures Compiled by R8zor Medieval Tavern Compiled by R8zor Stackable Foundations Compiled by R8zor Uber Crafter Compiled by R8zor Bulk Crafters Meat Spoiler ARK Commander 1.0.6 is coming along well, I've had some unexpected delays due to the ongoing storms here (no power) I'm hoping to release around the same time ARK v248 drops and with a little love for the RCON fans Link to comment Share on other sites More sharing options...
MochixMoon Posted October 20, 2016 Share Posted October 20, 2016 Hey, I'm having a weird issue and I can't seem to fix it. Ark Commander is working fine, but it's displaying oddly. The panel on the far right is being cut off to the left rather than off the screen. I can't figure out how to fix this so any input would be greatly appreciated. Setting up a second monitor isn't something I'm too super into with how little desk space I have. EDIT: Just finished reading through all the pages and saw it only displays in a specific resolution. I saw you said about a month ago you planned on adding other resolutions. Do you still plan on doing that? Link to comment Share on other sites More sharing options...
Nemesis851 Posted October 20, 2016 Share Posted October 20, 2016 Originally posted by lilkinsly: So has anybody actually checked this for anything malicious? Lot's of trusting people it seems. ____________________________________________________________________________________ I agree. When Something says sign in with STEAM mandatory, AND provide a login to MY website, there is possibility of something fishy. Also remember folks this is an EXE (capable of anything) I'm here because I'm interested in using the program, but... Why can't we just DL the .exe standalone, with no credentials? Link to comment Share on other sites More sharing options...
Audican Posted October 20, 2016 Share Posted October 20, 2016 I am having the same Issue as MochixMoon but can only see the first 3 rows. Can't even get to settings. Anybody know how to fix this or even change it back to Windowed Mode Link to comment Share on other sites More sharing options...
Lewimaron Posted October 20, 2016 Share Posted October 20, 2016 7 minutes ago, Audican said: I am having the same Issue as MochixMoon but can only see the first 3 rows. Can't even get to settings. Anybody know how to fix this or even change it back to Windowed Mode What resolution is your screen? Link to comment Share on other sites More sharing options...
Audican Posted October 20, 2016 Share Posted October 20, 2016 1 minute ago, Lewimaron said: What resolution is your screen? 1360x768...the max it will go Link to comment Share on other sites More sharing options...
Lewimaron Posted October 20, 2016 Share Posted October 20, 2016 4 minutes ago, Audican said: 1360x768...the max it will go Currently commander is only scaled to work with 1080p in overlay mode. Next version has scaling. Link to comment Share on other sites More sharing options...
Audican Posted October 20, 2016 Share Posted October 20, 2016 9 minutes ago, Lewimaron said: Currently commander is only scaled to work with 1080p in overlay mode. Next version has scaling. Ok thanks. Do you know if there is a way to get it out of overlay mode and back to windows mode?... Never mind fixed it...went to a smaller monitor that supports bigger resolution. Link to comment Share on other sites More sharing options...
Lewimaron Posted October 20, 2016 Share Posted October 20, 2016 10 minutes ago, Audican said: Ok thanks. Do you know if there is a way to get it out of overlay mode and back to windows mode?... Never mind fixed it...went to a smaller monitor that supports bigger resolution. go to Users\user\appdata\local\AC Somewhere in that folder there should be a user.config. Delete that file and it should reset the configs to default Link to comment Share on other sites More sharing options...
nirty66 Posted October 21, 2016 Share Posted October 21, 2016 Hi, and sorry for my poor english, Great program... I recomend this program for all Admins and Bases Buiders, save a lot of time building any infraestructure Structures Plus items are outdated... some has change the blueprint and new aditions. Platform Anywhere new Mod with the same creator of Structures Plus. Thx for a great job Link to comment Share on other sites More sharing options...
ShadowFR Posted October 22, 2016 Share Posted October 22, 2016 doesn't work for me, it doesn't show up in game in input SIM mod ... Link to comment Share on other sites More sharing options...
Norlinri Posted October 22, 2016 Share Posted October 22, 2016 Hey Nice work, still figuring out how to make everything work properly but that seems awesome so far I just had some quick questions/suggestions - I tried the Spawn Actor Spread command, works like a charm. Though would there be a way to spawn a specific amount of dinos of a certain level? Like 12 Dodos, each would be of the same level instead of random. Just asking, even if I think it's up to the developers to add it to the admin commands directly. - Would there be a way to add a field to write directly the amount of items/dinos you want to spawn? - About the acTAME, do you have any plans to add custom multipliers, for unofficial servers? Sorry if some or all the questions have already been answered Thanks for this software, really helpful Link to comment Share on other sites More sharing options...
sendjes Posted October 24, 2016 Share Posted October 24, 2016 Is it just me, or are hotkeys for custom commands not working? Link to comment Share on other sites More sharing options...
sparcmx Posted October 24, 2016 Author Share Posted October 24, 2016 1 hour ago, sendjes said: Is it just me, or are hotkeys for custom commands not working? No its not you, there is an issue there. I'll have this sorted out in a point release shortly (going to change a big chunk of code) Link to comment Share on other sites More sharing options...
sendjes Posted October 24, 2016 Share Posted October 24, 2016 Nice to hear. Link to comment Share on other sites More sharing options...
RedDwarf Posted October 24, 2016 Share Posted October 24, 2016 Hey guys, awesome app! Could you add "Stackable Adobe Foundation" for the Stackable Foundations mod? I noticed it was missing from the list. Here's the spawn code: admincheat GiveItem "Blueprint'/Game/Mods/StackableFoundations/Adobe/Floor/PrimalItemStructure_StackableAdobeFloor.PrimalItemStructure_StackableAdobeFloor'" 1 1 0 Link to comment Share on other sites More sharing options...
DinoHunterExtreme Posted October 24, 2016 Share Posted October 24, 2016 (Apologies if this has been asked) When will this come to Xbox? Link to comment Share on other sites More sharing options...
sendjes Posted October 25, 2016 Share Posted October 25, 2016 I just grabbed the new Portable version, and I still get crashes when trying to bind a key to a custom command. Link to comment Share on other sites More sharing options...
Guest Bluenor Posted October 25, 2016 Share Posted October 25, 2016 Hello, this tool can be used in multiplayer private servers? How i can install and use it? It 'up to date and compatible with the dlc the center. This map, after the 245.0 has undergone a translation that has phase-shifted on the map coordinates x, y, z is updated with the phase shift? Thank you! Link to comment Share on other sites More sharing options...
Lewimaron Posted October 25, 2016 Share Posted October 25, 2016 6 minutes ago, Bluenor said: Hello, this tool can be used in multiplayer private servers? How i can install and use it? It 'up to date and compatible with the dlc the center. This map, after the 245.0 has undergone a translation that has phase-shifted on the map coordinates x, y, z is updated with the phase shift? Thank you! As long as you have admin privileges on the server then yes you can use it there. Just download and run the exe file and that should be it. And yes, the teleport maps have been updated and are compatible with the center and scorched earth. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.