Alvastar Posted November 26, 2018 Share Posted November 26, 2018 Building my base on Extinction, built many bases over the years and never had this issue before. everything else in the base lines up perfectly but then there is this stupid gap in the sloped stone ceiling? how does this even happen... where is S+ like they promised, its a much better building mod they just need to scrap the current and hurry up and put s+ in. pic below shows the gap, lower ceiling row has gap in another area as i tried to fix it. Link to comment Share on other sites More sharing options...
Lycan187u Posted November 26, 2018 Share Posted November 26, 2018 Useing fence foundation? Link to comment Share on other sites More sharing options...
DMSO Posted November 26, 2018 Share Posted November 26, 2018 your ceilings dont seem snapped together on a foundation/ snapped pillar building maybe worng snappoints on ceilings below somewhere? Link to comment Share on other sites More sharing options...
Scrysis Posted November 27, 2018 Share Posted November 27, 2018 I feel bad for everyone on official who still is stuck with the original building materials. I gave up on that years ago when I went to S+. Link to comment Share on other sites More sharing options...
GGSDubSt3pz Posted November 27, 2018 Share Posted November 27, 2018 The snappoint of sloped ceilings is just messed up. it always was. the longer you go from the wall the bigger the gap. a little trick i use is to just build a wall in the middle of the building with a sloped wall ontop and then build from the outside walls further inside and from the middle wall to the outside untill they meet each other Link to comment Share on other sites More sharing options...
GrumpyBear Posted November 27, 2018 Share Posted November 27, 2018 Extinction allows some interesting options though in building. Notice the lack of pillars underneath? Link to comment Share on other sites More sharing options...
Hashbat Posted November 28, 2018 Share Posted November 28, 2018 11 hours ago, GrumpyBear said: Extinction allows some interesting options though in building. Notice the lack of pillars underneath? DILO, I dream of having a level elevated base that doesn't require me to deal with pillars and their exceedingly ridiculous snap points on official. I must know your methods. How does 150 thatch sound? Perhaps a stack of Flint for you to spill the beans? Link to comment Share on other sites More sharing options...
GrumpyBear Posted November 28, 2018 Share Posted November 28, 2018 Lol, there’s still pillars, They are just on the roof instead. Taking over the derelict structure I set up the grid on the roof. The roof on this building was split leveled so I had to build off one side to get the other half of the roof in the grid. Then from under the roof I could see the pillars sticking through, so I just pillared down from the corners and then ceilings and walled down. Link to comment Share on other sites More sharing options...
MyM16sHot Posted November 30, 2018 Share Posted November 30, 2018 Happened to us as well when we built a 5x5 metal base, I just demolished all the ceilings around the problem area and when I replaced them it was fixed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.