cyrax76 Posted February 17, 2020 Share Posted February 17, 2020 how to increase imprint percentage? So we tried to breed raptors on our server (ark server manager). I set the cuddle interval to 0.01, because we had to wait 8 hour for the first care, and the raptor grow up by then. The problem is that the raptor get only 3% with each care, which means, we can never get a 100% imprint. What do i need to change to increase the ammout/percentage of the imprints? Link to comment Share on other sites More sharing options...
yar Posted February 17, 2020 Share Posted February 17, 2020 Procoptodon Link to comment Share on other sites More sharing options...
PertySlick Posted February 18, 2020 Share Posted February 18, 2020 If you are messing with server settings, the percentage of imprint is determined by how many times the current setting allows an imprint before full maturation. For example (simplified for math sake) if your tame's maturation time is 20 minutes and your imprint timer is 1 minute, you will have to imprint 20 times at 5% each. So you can increase your cuddle interval to make the imprint take longer. If you increase the cuddle interval in the above example so the imprint timer is 5 minutes, you will imprint 4 times at 25% each. Plus, even though it says "3%", it is most likely a decimal number being rounded but it will add up to 100% in the end. The problem is your cuddle interval is so small, you will have to do a lot of cuddling to get there. Messing with maturation and imprint settings is a delicate balance. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.