Sh4ck Posted March 16, 2020 Share Posted March 16, 2020 Problem with yutyrannus imprint Hi. I am writing to tell you that under normal conditions it is IMPOSSIBLE to get 100% imprint on this dinosaur. Without any type of multiplier in the offspring, when the 8 hours between affection and affection are met, the dinosaur receives a 4% imprint, while maturation advances 4.3%. I have verified it by claiming the baby as soon as it is born (not even 4 seconds had passed since the hatching of the egg) and giving it affection just in the second 1 after I asked for it. How can this be possible? Am I going to have to wait with the need for affection waiting on a cryopod for when they put up a brood multiplier boost? Greetings and I await your responses to know what you think. Link to comment Share on other sites More sharing options...
Shirosacid Posted March 17, 2020 Share Posted March 17, 2020 Maybe it was x2,x3 Breeding to a certain time , that can give you this problem You can let it Stay outside until you need to imprint it and cryopod it. get it out when x2 or x3 breeding is so you have 8% Maturation and 12% Imprint Link to comment Share on other sites More sharing options...
PertySlick Posted March 17, 2020 Share Posted March 17, 2020 Also, imprint percentages do not display decimals even though they exist. So while 2 imprints may net you 8%, three may give you 13% due to the decimal values finally adding up. I don't know the exact numbers, but if you keep an eye on that after the third or fourth imprint I bet you'll notice a 1% jump at some point. Link to comment Share on other sites More sharing options...
RageQuitter Posted March 17, 2020 Share Posted March 17, 2020 2 hours ago, PertySlick said: Also, imprint percentages do not display decimals even though they exist. So while 2 imprints may net you 8%, three may give you 13% due to the decimal values finally adding up. I don't know the exact numbers, but if you keep an eye on that after the third or fourth imprint I bet you'll notice a 1% jump at some point. Yeah, the actual amount according to the spreadsheet I use is 4.35% so will be just over 13% on the 3rd imprint, on 1x maturation it takes around 111.11 minutes per 1% so first imprint will be at 4.3% mature and will show as 4% (4.35 actual) 2nd imprint will be at 8.6% mature and will show 8% (8.7% actual) it won't be until the 3rd imprint that the displayed imprint amount overtakes the mature percentage You have just over 3 mins leeway on each imprint, the total mature time is over 7 days so if it does go into an evolution event at some time then you should still be OK as there's a lot more leeway for yutys at 2x with 8 hour imprints Link to comment Share on other sites More sharing options...
Erinn Posted March 18, 2020 Share Posted March 18, 2020 The same goes for basilos, getting 4,3% imprint at 4% maturation... And dont let me start on gachas, they get 7% imprint at 9% maturation or something like that. Link to comment Share on other sites More sharing options...
SinNombre Posted September 21, 2020 Share Posted September 21, 2020 Thanks for clarifying this, I thought I did my math wrong when I saw the imprint was only 4%. So if it is indeed 4.35%, then it is possible to make it to 100%. Total maturation takes approximately 185 hours and 11 minutes, which means you’ll have 23 total imprints all together. I would just cryo it everytime it asks for a walk. Link to comment Share on other sites More sharing options...
GrumpyBear Posted September 22, 2020 Share Posted September 22, 2020 We see this post every couple months and it’s the same thing every time. If you did a little search , you would see you aren’t the first person to get confused by how it works, you won’t be the last. Link to comment Share on other sites More sharing options...
Hemplethwaite Posted September 23, 2020 Share Posted September 23, 2020 How does this work, I'm confused 😛 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.