Knoxy3004 Posted March 9, 2019 Share Posted March 9, 2019 So a few weeks ago I started building a water pen large enough to house and breed the big nasty. Then I copped wind of a new wall that will be 4 times high. So instead of going through placing each single wall 1 by 1 I held off and waited for the new patch. Only to realise that the new walls could not be placed underneath ceilings!! I've tried everything I can think off to trick the new walls to place and nothing works. Does anyone have any recommendations apart from using small walls? Link to comment Share on other sites More sharing options...
Zahlea Posted March 9, 2019 Share Posted March 9, 2019 I have no help to offer, sorry, but thanks for shedding light on this issue. I hope it'll be fixed! Link to comment Share on other sites More sharing options...
CCRogerWilco Posted March 9, 2019 Share Posted March 9, 2019 This used to work in Structures Plus, but it seems to be broken in both the mod and the base game now, even after the latest .104 patch. Most of the other snap points work again, but the 4x Large Walls are still having issues. Link to comment Share on other sites More sharing options...
Knoxy3004 Posted March 10, 2019 Author Share Posted March 10, 2019 Yeah hopefully they change it to work like normal walld Link to comment Share on other sites More sharing options...
SaltyMonkey Posted March 10, 2019 Share Posted March 10, 2019 21 hours ago, Knoxy3004 said: So a few weeks ago I started building a water pen large enough to house and breed the big nasty. Then I copped wind of a new wall that will be 4 times high. So instead of going through placing each single wall 1 by 1 I held off and waited for the new patch. Only to realise that the new walls could not be placed underneath ceilings!! I've tried everything I can think off to trick the new walls to place and nothing works. Does anyone have any recommendations apart from using small walls? Until fixed, is there no way you can snap the ceilings on top of the walls in reverse, because I’ve had no issues doing it that way? Alternatively, just snap a single wall on top of each large wall then proceed with snapping the ceilings. Link to comment Share on other sites More sharing options...
Knoxy3004 Posted March 10, 2019 Author Share Posted March 10, 2019 3 hours ago, SaltyMonkey said: Until fixed, is there no way you can snap the ceilings on top of the walls in reverse, because I’ve had no issues doing it that way? Alternatively, just snap a single wall on top of each large wall then proceed with snapping the ceilings. I could if I wanted to rebuild the entire water pen.. the ceilings aren't the issue, it the walls. I've got pillars with a gap in between them all around for the skeleton of the pen with ceilings placed on top of the pillars.. I used trickery to make sure the pillars are flush to ceiling with nothing popping through ceilings. I'll post a pic later if I remember Link to comment Share on other sites More sharing options...
Tebo Posted March 11, 2019 Share Posted March 11, 2019 This hasn't been possible in S+ for at least six months, and I can't remember a time it ever was. This isn't something WildCard broke, it was a bug/feature/design choice they took from S+ itself. Link to comment Share on other sites More sharing options...
PreshusRoze Posted March 11, 2019 Share Posted March 11, 2019 We just reworked part of our water pen with the 4x walls (replacing the 1x walls). And there was no way we were able to get the walls to "hang" from the top. Our water pen has a actual floor (not sea bed) so we were able to strip one column out and filled in with the 4x and topped off with 1x as needed. Otherwise - yeah, they are broke Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.