cad Posted May 25, 2016 Author Share Posted May 25, 2016 8 hours ago, Jey123456 said: would be cool to have the probability for the worse possible breed (like we have the best one) as well as maybe a third line showing the most probable result. Also, it would be cool for actual value to be written as tooltip when you over the wild level values (for instance in the best possible breed preview, hovering 28 in the hp column on a bronto breed would output "hp:13992.1" as tooltip Hi, good ideas, I'll include them in the next release. Link to comment Share on other sites More sharing options...
hardcorebreeder Posted May 25, 2016 Share Posted May 25, 2016 On 24/05/2016 at 4:07 PM, cad said: @hardcorebreeder Hi, just checked it with some species and it works. What creatures did you try to extract? Did you set the max wild level to 150 in the settings? Hey, my bad. I didn't know there were settings to change max levels. Thanks for the help though, huge relief. HA Link to comment Share on other sites More sharing options...
cad Posted May 25, 2016 Author Share Posted May 25, 2016 24 minutes ago, hardcorebreeder said: Hey, my bad. I didn't know there were settings to change max levels. Thanks for the help though, huge relief. HA It was introduced only recently. It helps sorting out more impossible combinations for the extracting, making that a bit easier. Link to comment Share on other sites More sharing options...
CleanCrazyy Posted June 3, 2016 Share Posted June 3, 2016 On 4/2/2016 at 6:39 PM, cad said: So how is the quetz nerfs and the baby imprinting gonna affect this Link to comment Share on other sites More sharing options...
CleanCrazyy Posted June 17, 2016 Share Posted June 17, 2016 The program isnt accepting 2 of my new argys because their health is 2814.9 and before anyone says i have quadruple checked that i entered everything right and checked the stat multipliers on the program. Link to comment Share on other sites More sharing options...
cad Posted June 18, 2016 Author Share Posted June 18, 2016 @CleanCrazyy if you already started the imprinting-process the tool cannot handle this yet. Extract the creatures before starting with cuddling for now. Link to comment Share on other sites More sharing options...
Clarey Posted June 29, 2016 Share Posted June 29, 2016 Hi there. I absolutely love the app I am having a problem however entering the stats of Compys. The rest of the stats go green but the HP is red always. I've been trying for a few weeks now to input the stats of my 9 Compys to no avail. Everything is entered correctly, the right boxes are ticked, it is all up to date. It's just not working for me Also, is there anyway to select a male/female and see what offspring they might have? I can tame something new and I know it has a higher stat but it's not coming up in the breeding plan and I can't see anyway to look at said tame against another to see possible baby information. Please help Many thanks! ~ Clare Link to comment Share on other sites More sharing options...
cad Posted June 30, 2016 Author Share Posted June 30, 2016 11 hours ago, Clarey said: Hi there. I absolutely love the app I am having a problem however entering the stats of Compys. The rest of the stats go green but the HP is red always. I've been trying for a few weeks now to input the stats of my 9 Compys to no avail. Everything is entered correctly, the right boxes are ticked, it is all up to date. It's just not working for me Also, is there anyway to select a male/female and see what offspring they might have? I can tame something new and I know it has a higher stat but it's not coming up in the breeding plan and I can't see anyway to look at said tame against another to see possible baby information. Please help Many thanks! ~ Clare Hi, if the Compys have an imprinting-bonus, the tool cannot extract their levels anymore. If not, try to level them once and try again (sometimes the game shows wrong numbers that get fixed after an upleveling). If that doesn't work, send me a screenshot of the inventory with all the stat-values. You can rightclick a creature and choose "Best Breeding Partners" to show a list with only that creature. If the other creature does not appear, try to increase the Max Breeding Pair Suggestions in the settings. Link to comment Share on other sites More sharing options...
Clarey Posted June 30, 2016 Share Posted June 30, 2016 Ty for the reply Cad. I added 1 level to a compy and it didn't work, tried 2 and it still did not work. These are all wild tamed, not bred so no imprinting at all. It does recognise that it's had 2 lvls put into Melee but that HP is still red so cannot input it Stats of a compy I tamed, with 2 lvls added it is now 161 :http://imgur.com/veRAUIL Added 2 lvls in Melee Damage but it still wont accept it:http://imgur.com/UYokrwa I can't find where to right click to view best breeding partners, as it just seems to put it into the extractor when right clicked from the library Link to comment Share on other sites More sharing options...
hardcorebreeder Posted June 30, 2016 Share Posted June 30, 2016 (edited) Hey Cad I've noticed all those files you've added and they seem to look really nice, I just don't really know how to manually install them D: I tried doing the updated stats for gigas/pteras but the program still fails to understand the new numbers? Before you put them to one folder they did seem to work though. The first time I tried to copy paste them over, the first line "// a line with only one value marks a new creature" shows in the drop-down box, where you select the dino you wish to extract the stats from. And as always, I love your work!! i probably would've quit the game months ago if it wasn't for you. NOT SURE IF THATS A GOOD THING! PS. Everything i stat check just does not seem to work, Sarcos, Procoptodons and probably a lot more dinos, I have tried to redownload the program but this doesn't change EDIT: OCR Scanner doesn't work for sarcos, perhaps the missing oxygen screws this up? EDIT: oh.. figured out the issues, nevermind! Edited June 30, 2016 by hardcorebreeder Link to comment Share on other sites More sharing options...
cad Posted June 30, 2016 Author Share Posted June 30, 2016 4 hours ago, Clarey said: Ty for the reply Cad. I added 1 level to a compy and it didn't work, tried 2 and it still did not work. These are all wild tamed, not bred so no imprinting at all. It does recognise that it's had 2 lvls put into Melee but that HP is still red so cannot input it Stats of a compy I tamed, with 2 lvls added it is now 161 :http://imgur.com/veRAUIL Added 2 lvls in Melee Damage but it still wont accept it:http://imgur.com/UYokrwa I can't find where to right click to view best breeding partners, as it just seems to put it into the extractor when right clicked from the library Hi, the compy-stats were nerfed as it seems. I updated the stats for the tool. Regarding the missing context-menu, it seems you're using an old version of the tool. Redownload the current version here : https://github.com/cadon/ARKStatsExtractor/releases/latest and then get the new stat-file by clicking on ? -> Check for Updates in the menu. Link to comment Share on other sites More sharing options...
cad Posted June 30, 2016 Author Share Posted June 30, 2016 2 hours ago, hardcorebreeder said: Hey Cad I've noticed all those files you've added and they seem to look really nice, I just don't really know how to manually install them D: I tried doing the updated stats for gigas/pteras but the program still fails to understand the new numbers? Before you put them to one folder they did seem to work though. The first time I tried to copy paste them over, the first line "// a line with only one value marks a new creature" shows in the drop-down box, where you select the dino you wish to extract the stats from. And as always, I love your work!! i probably would've quit the game months ago if it wasn't for you. NOT SURE IF THATS A GOOD THING! PS. Everything i stat check just does not seem to work, Sarcos, Procoptodons and probably a lot more dinos, I have tried to redownload the program but this doesn't change EDIT: OCR Scanner doesn't work for sarcos, perhaps the missing oxygen screws this up? Hi, glad you like it what do you mean exactly with "all those files" and "manually install them"? There are new source-files every now and then, but these shouldn't bother you, the thing you need is only the zipped release. Did you check for an updated stats-file by clicking on ? -> Check for Updates in the menu? This updates the stat-file automatically, no need to copy/paste numbers manually. The OCR is still under development, and on resolutions other than 1080 it sometimes doesn't work well. I'll check if the sarco needs extra attention, though. Link to comment Share on other sites More sharing options...
hardcorebreeder Posted July 1, 2016 Share Posted July 1, 2016 (edited) 11 hours ago, cad said: Hi, glad you like it what do you mean exactly with "all those files" and "manually install them"? There are new source-files every now and then, but these shouldn't bother you, the thing you need is only the zipped release. Did you check for an updated stats-file by clicking on ? -> Check for Updates in the menu? This updates the stat-file automatically, no need to copy/paste numbers manually. The OCR is still under development, and on resolutions other than 1080 it sometimes doesn't work well. I'll check if the sarco needs extra attention, though. ohh.. i was looking around through those files you were adding to that website, didnt really know what most of it meant but i saw something about imprinting bonuses? It'd be awesome if you can extract these figures off of imprinted bonuses Edited July 1, 2016 by hardcorebreeder Link to comment Share on other sites More sharing options...
Vonpritz Posted July 1, 2016 Share Posted July 1, 2016 Mobile app pls Link to comment Share on other sites More sharing options...
Jey123456 Posted July 5, 2016 Share Posted July 5, 2016 (edited) I have a new suggestion. Would it be possible to add a "added date" to the library list so we could sort by when we added / obtained the dino ? Would make it easier to see generation improvements and i imagine it shouldnt be hard to add for the future dinos at least (not sure if you have the date on the existing data). Just using the index to give them a fake date so that older ones get listed as older even tho we dont have the exist date would probably be more than enough to not mess up old databases. Edited July 5, 2016 by Jey123456 Link to comment Share on other sites More sharing options...
cad Posted July 5, 2016 Author Share Posted July 5, 2016 5 hours ago, Jey123456 said: I have a new suggestion. Would it be possible to add a "added date" to the library list so we could sort by when we added / obtained the dino ? Would make it easier to see generation improvements and i imagine it shouldnt be hard to add for the future dinos at least (not sure if you have the date on the existing data). Just using the index to give them a fake date so that older ones get listed as older even tho we dont have the exist date would probably be more than enough to not mess up old databases. Hi, I recently added a timestamp-property "domesticated at" for dinos, but it's not yet available in the library. Good you mention it, I'll add a column for that. Link to comment Share on other sites More sharing options...
hybredmoon Posted July 5, 2016 Share Posted July 5, 2016 Getting an exception when I try to open the settings menu on the latest version: Unhandled eception has occured in your application: Object refrence not set to an instance of an object ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at ARKBreedingStats.Settings.setControls(CreatureCollection cc) at ARKBreedingStats.Settings..ctor(CreatureCollection cc) at ARKBreedingStats.Form1.settingsToolStripMenuItem_Click(Object sender, EventArgs e) at System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e) at System.Windows.Forms.ToolStripMenuItem.OnClick(EventArgs e) at System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e) at System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e) at System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met) at System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met) at System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea) at System.Windows.Forms.ToolStripDropDown.OnMouseUp(MouseEventArgs mea) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ScrollableControl.WndProc(Message& m) at System.Windows.Forms.ToolStrip.WndProc(Message& m) at System.Windows.Forms.ToolStripDropDown.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) Link to comment Share on other sites More sharing options...
cad Posted July 5, 2016 Author Share Posted July 5, 2016 @hybredmoon Hi and thanks, that'll be fixed in the next version 0.20.2. Should be online in 10 min. Link to comment Share on other sites More sharing options...
hybredmoon Posted July 5, 2016 Share Posted July 5, 2016 34 minutes ago, cad said: @hybredmoon Hi and thanks, that'll be fixed in the next version 0.20.2. Should be online in 10 min. Working perfectly now, many thanks. I never could get the hang of Json. Link to comment Share on other sites More sharing options...
cad Posted July 5, 2016 Author Share Posted July 5, 2016 11 minutes ago, hybredmoon said: Working perfectly now, many thanks. I never could get the hang of Json. Json makes it easier to load the settings. The file with the tool is compressed, to view or edit it use a json-editor like http://www.jsoneditoronline.org/. Link to comment Share on other sites More sharing options...
hybredmoon Posted July 5, 2016 Share Posted July 5, 2016 3 minutes ago, cad said: Json makes it easier to load the settings. The file with the tool is compressed, to view or edit it use a json-editor like http://www.jsoneditoronline.org/. Nice, will give it a look. I have a Json plugin for eclipse but after algorithm design and analysis I swore I wasn't going to so much as look at code for the whole summer Link to comment Share on other sites More sharing options...
Shiro9 Posted July 6, 2016 Share Posted July 6, 2016 Hello, just a question. I put in the numbers for my 2 spino, and it said LW = 85/82. I tamed them at level 120/116. Does this mean my dino stat low as a level 85? The male is 120 and female is 116. Link to comment Share on other sites More sharing options...
cad Posted July 7, 2016 Author Share Posted July 7, 2016 11 hours ago, Shiro9 said: Hello, just a question. I put in the numbers for my 2 spino, and it said LW = 85/82. I tamed them at level 120/116. Does this mean my dino stat low as a level 85? The male is 120 and female is 116. Hi, that means the tool thinks the spinos have been level 85 and 82 in the wild, and after you tamed them they were level 120 and 116 due to the bonus-levels you got for the taming. Link to comment Share on other sites More sharing options...
Shiro9 Posted July 7, 2016 Share Posted July 7, 2016 4 hours ago, cad said: Hi, that means the tool thinks the spinos have been level 85 and 82 in the wild, and after you tamed them they were level 120 and 116 due to the bonus-levels you got for the taming. I went ahead and try to breed them, my parent spinos have the same health after tamed, and the baby damage is higher than the parents. Does the info I put in the Smart Breeding look correct? Thanks ^^ Link to comment Share on other sites More sharing options...
cad Posted July 7, 2016 Author Share Posted July 7, 2016 29 minutes ago, Shiro9 said: I went ahead and try to breed them, my parent spinos have the same health after tamed, and the baby damage is higher than the parents. Does the info I put in the Smart Breeding look correct? Thanks ^^ The baby should inherit the stats, so for each stat the baby's stat should be equal to one of the parent's. Are you sure that Invidia is the offspring of Aqua and Azure? Does any of the dinos have an imprinting-bonus (the tool cannot handle this yet)? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now