cad Posted April 11, 2017 Author Share Posted April 11, 2017 11 hours ago, Nooblet said: @cad Wondering if i might be able to get some help? I have set all the setting to what the server is set to except "Max Graph Level" ( im guessing this is how many levels the dino can level after being tamed? set it to 71) But for some reason anything i try to add to the library comes up with an issue, red stat or just wont extract at all. As for the server the only mod it has is pre nerf flyers mod & increased rates. Included a picture of the setting's page. Hi, the "Max Graph Level" is only for the visuals in the tool, it does not affect anything from the calculations. The level after taming is the "Max Tamed Levelups". The classical-flyers mod changes stat-values, so it's not usable with the tool. There's a way to adjust stat-values with an extra file with the tool, I don't know if that's already working with the classical flyers mod, though. Have a look here: https://github.com/cadon/ARKStatsExtractor/issues/244 Link to comment Share on other sites More sharing options...
Rinjii Posted April 11, 2017 Share Posted April 11, 2017 (edited) @cad How do you add dinos with no oxygen stat? Having issues trying to add my Basilosaurus in. Edited April 11, 2017 by Rinjii Link to comment Share on other sites More sharing options...
Totallyevil1 Posted April 11, 2017 Share Posted April 11, 2017 I am having problems adding Carbonemys too as they have no oxygen stat. Link to comment Share on other sites More sharing options...
Currahee Posted April 11, 2017 Share Posted April 11, 2017 1 hour ago, Rinjii said: @cad How do you add dinos with no oxygen stat? Having issues trying to add my Basilosaurus in. 37 minutes ago, Totallyevil1 said: I am having problems adding Carbonemys too as they have no oxygen stat. Using 0 doesn't work? Link to comment Share on other sites More sharing options...
Totallyevil1 Posted April 11, 2017 Share Posted April 11, 2017 (edited) 17 minutes ago, Currahee said: Using 0 doesn't work? No, when using 0 the section turns red and you cannot dedicate a dinos stats to the library. Edited April 11, 2017 by Totallyevil1 Link to comment Share on other sites More sharing options...
BertNoobians Posted April 12, 2017 Share Posted April 12, 2017 (edited) i cant seem to turn off oxygen so i filled in 150 for the turtle which is i think the base oxygen level. im then getting 55 points in speed, seems ridiculous. did i find a high hidden speed stat turtle, or am i doing this wrong ? edit: no this cant be right, all my turtles have high speed this way, i hope this problem will be fixed soon. Edited April 12, 2017 by BertNoobians Link to comment Share on other sites More sharing options...
rattenmann Posted April 14, 2017 Share Posted April 14, 2017 On 12.4.2017 at 0:09 AM, Rinjii said: @cad How do you add dinos with no oxygen stat? Having issues trying to add my Basilosaurus in. Same issue here. I can not add any water Dinos. Please get a fix for this out since we can now finally breed them :-) Link to comment Share on other sites More sharing options...
mastermat Posted April 15, 2017 Share Posted April 15, 2017 Hey there. Any idea what could be wrong here that the tool mismatched the levels fort his rex: http://prntscr.com/ewwoug Freshly bred on officials. Double checked the numbers. Link to comment Share on other sites More sharing options...
Kalizard Posted April 18, 2017 Share Posted April 18, 2017 Good evening all. I play on Xbox and I've been looking for something like this. The only problem it says almost all my level values are wrong and in the help section, it says, as a console player, I need to download an older version and use the values json file from the older version. Only problem is, where do I find an older version? Or do I just wait for the new update. Link to comment Share on other sites More sharing options...
b0ender Posted April 22, 2017 Share Posted April 22, 2017 ever since new UI update, ocr is so bad i hope u plan on improving that it was working flawless on old ui Link to comment Share on other sites More sharing options...
Guest BubbaCrawfish Posted April 23, 2017 Share Posted April 23, 2017 Encountering an error when using this for Unicorns at times. Unhandled Exception Value cannot be null, Parameter name: source. See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.ArgumentNullException: Value cannot be null. Parameter name: source at System.Linq.Enumerable.Select[TSource,TResult](IEnumerable`1 source, Func`2 selector) at ARKBreedingStats.CreatureBox.setCreature(Creature creature) at ARKBreedingStats.Form1.listViewLibrary_SelectedIndexChanged(Object sender, EventArgs e) at System.Windows.Forms.ListView.OnSelectedIndexChanged(EventArgs e) at System.Windows.Forms.ListView.WmReflectNotify(Message& m) at System.Windows.Forms.ListView.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.6.1637.0 built by: NETFXREL3STAGE CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll ---------------------------------------- ARK Smart Breeding Assembly Version: 1.0.0.0 Win32 Version: 0.22.4 CodeBase: file:///C:/Users/Gamer/Downloads/ARK.Smart.Breeding_0.20.11.2/ARK%20Smart%20Breeding.exe ---------------------------------------- System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 4.0.0.0 Win32 Version: 4.6.1637.0 built by: NETFXREL3STAGE CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.6.1638.0 built by: NETFXREL3STAGE CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll ---------------------------------------- System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- Microsoft.GeneratedCode Assembly Version: 1.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- Microsoft.GeneratedCode Assembly Version: 1.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- Microsoft.GeneratedCode Assembly Version: 1.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- Microsoft.GeneratedCode Assembly Version: 1.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Runtime.Serialization Assembly Version: 4.0.0.0 Win32 Version: 4.6.1637.0 built by: NETFXREL3STAGE CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Runtime.Serialization/v4.0_4.0.0.0__b77a5c561934e089/System.Runtime.Serialization.dll ---------------------------------------- SMDiagnostics Assembly Version: 4.0.0.0 Win32 Version: 4.6.1637.0 built by: NETFXREL3STAGE CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/SMDiagnostics/v4.0_4.0.0.0__b77a5c561934e089/SMDiagnostics.dll ---------------------------------------- System.ServiceModel.Internals Assembly Version: 4.0.0.0 Win32 Version: 4.6.1637.0 built by: NETFXREL3STAGE CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.ServiceModel.Internals/v4.0_4.0.0.0__31bf3856ad364e35/System.ServiceModel.Internals.dll ---------------------------------------- Microsoft.GeneratedCode Assembly Version: 1.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. Am I missing something? It works on everything else, but sometimes if I do encounter this and select an Equus it'll also throw the exception I think. Link to comment Share on other sites More sharing options...
mastermat Posted April 27, 2017 Share Posted April 27, 2017 Please fix OCR. IT used to work almost perfectly. Our fingers will be eternally grateful:) Link to comment Share on other sites More sharing options...
cad Posted April 29, 2017 Author Share Posted April 29, 2017 Hi @Rinjii, @Totallyevil1, @BertNoobians and @rattenmann, make sure you don't have checked the "Enable Oxygen for all Species" in the general settings, this should only be anbled if you use mods that show the oxygen-stat for all species. If you have disabled this setting and still see the oxygen-stat enabled for the species that shouldn't have it, try restarting the tool, select another species with oxygen and then back to the species you had. Hi @mastermat, is the possibility with 44 levels in stamina not correct? It would be this combination: Rex (Lvl 305, Impr: 73.44%): HP: 14626.7 (50, 1); St: 2268 (44, 0); Ox: 675 (35, 0); Fo: 13762.6 (30, 0); We: 894.6 (28, 0); Dm: 766.1% (50, 35); Sp: 114.7% (31, 0); To: 30363 (268); Hi @Kalizard, you can find a list of releases here: https://github.com/cadon/ARKStatsExtractor/releases , or you wait for the xbox-update, that should work, too. Hi @BubbaCrawfish, thanks for the report, that'll be fixed in the next release. Link to comment Share on other sites More sharing options...
Guest BubbaCrawfish Posted April 29, 2017 Share Posted April 29, 2017 Legendary Link to comment Share on other sites More sharing options...
Jonathanasger Posted April 29, 2017 Share Posted April 29, 2017 How does the "overlay" work? Is it like steam overlay, so I can acces it without alt-tabbing? Is it safe to use with battle-eye and stuff? Thanks Link to comment Share on other sites More sharing options...
Rinjii Posted April 29, 2017 Share Posted April 29, 2017 @cad Thank you for the reply! Ill try it out and post the results. Link to comment Share on other sites More sharing options...
TotallyUncool Posted April 30, 2017 Share Posted April 30, 2017 (edited) Hey, I decided to give this nifty tool another go as my tribemate/admin successfully could add a freshly tamed ptera yesterday (he couldn't add a thyla though...). I tested with my ankys again, and still get the food/melee errors as before, so tried with my terror birds instead and it worked! I could add all of my bred ones until I tried adding the ones with a melee mutation, then I got the red flag again. I can add the base melee no problems, but not the mutated variant of said melee so what could be the issue? I'll add two screenshots, one with the base melee and one with the mutated one. First one is of Amber who has been successfully added to my library: The second one I couldn't add because of the error: The ancestors of these two were tamed on cooked mutton chops on SE with x4 taming. I've no idea if this info helps any but thought I should add it anyway. Everything else is vanilla, no changed stat multipliers etc. EDIT: Just tested if I could add the stats of the ancestors and I can, but I do get yellow on weight and melee on them. I tried with an equus to and all green there. I don't get any yellow on the base stats on the bred terror birds though, it's all green. Edited April 30, 2017 by TotallyUncool Added info Link to comment Share on other sites More sharing options...
cad Posted April 30, 2017 Author Share Posted April 30, 2017 19 hours ago, Jonathanasger said: How does the "overlay" work? Is it like steam overlay, so I can acces it without alt-tabbing? Is it safe to use with battle-eye and stuff? Thanks If you enable the overlay, it will show additional infos, e.g. in the inventories it can show the level-numbers, or you can use the speech-recognition (if you enabled it in the settings) to display taming-infos during playing. It does not violate with battle-eye, it's safe to use. 3 hours ago, TotallyUncool said: Hey, I decided to give this nifty tool another go as my tribemate/admin successfully could add a freshly tamed ptera yesterday (he couldn't add a thyla though...). I tested with my ankys again, and still get the food/melee errors as before, so tried with my terror birds instead and it worked! I could add all of my bred ones until I tried adding the ones with a melee mutation, then I got the red flag again. I can add the base melee no problems, but not the mutated variant of said melee so what could be the issue? The ancestors of these two were tamed on cooked mutton chops on SE with x4 taming. I've no idea if this info helps any but thought I should add it anyway. Everything else is vanilla, no changed stat multipliers etc. EDIT: Just tested if I could add the stats of the ancestors and I can, but I do get yellow on weight and melee on them. I tried with an equus to and all green there. I don't get any yellow on the base stats on the bred terror birds though, it's all green. Hi, good to hear it works with some. I still have no idea what's the issue with the non-working. A mutation should only give two more levels, but 407% damage is not a valid number, the closest is 408.1% Maybe there was a change how mutations work. You can try to levelup the damage once, maybe it'll be recalculated and works then. Link to comment Share on other sites More sharing options...
TotallyUncool Posted April 30, 2017 Share Posted April 30, 2017 3 hours ago, cad said: Hi, good to hear it works with some. I still have no idea what's the issue with the non-working. A mutation should only give two more levels, but 407% damage is not a valid number, the closest is 408.1% Maybe there was a change how mutations work. You can try to levelup the damage once, maybe it'll be recalculated and works then. I forgot to mention that I leveled the melee on one of them by one level and it still didn't work. The melee is now 413.1% on the one I leveled up, maybe I should try and level it up again? It's great that I can add the base values though as I wanted to see how many lost levels I had on them, and we can add some animals at least. I'm starting to think that our servers are a bit..."special". Link to comment Share on other sites More sharing options...
Legondz Posted May 1, 2017 Share Posted May 1, 2017 (edited) Is there anything i have to do to tinker with the settings the program isnt grabbing the right stats is it the new UI? Trying to grab stats from baby rexes. Edited May 1, 2017 by Legondz Link to comment Share on other sites More sharing options...
cad Posted May 1, 2017 Author Share Posted May 1, 2017 12 hours ago, Legondz said: Is there anything i have to do to tinker with the settings the program isnt grabbing the right stats is it the new UI? Trying to grab stats from baby rexes. Hi, the UI-font was changed, I released a new version that should work better with that. Link to comment Share on other sites More sharing options...
FunctionalPessimist Posted May 2, 2017 Share Posted May 2, 2017 (edited) So I have 0.23 but I'm still having issues when trying to Read Values from ARK window. This is making it so I can't add the data to a library. Every time, without fail, four things are highligted as if they're invalid. The "Wild, Tamed, Bred" radial buttons are highlighted, the level box is highlighted, the lower end of the TE, and the "since taming no server-restart". I've done everything I can to fix it. All of my multipliers are correct in the settings. I'm in Windowed Fullscreen 1920x1080, all stats are unlocked, yet it's still not working. Any ideas? Edit: Also, when it does work, stats are highlighted in red, even though they're correct. Edited May 2, 2017 by FunctionalPessimist Link to comment Share on other sites More sharing options...
Legondz Posted May 2, 2017 Share Posted May 2, 2017 10 hours ago, cad said: Hi, the UI-font was changed, I released a new version that should work better with that. what version would that be? Link to comment Share on other sites More sharing options...
Guest BubbaCrawfish Posted May 2, 2017 Share Posted May 2, 2017 1 hour ago, Legondz said: what version would that be? 0.23? Link to comment Share on other sites More sharing options...
Legondz Posted May 2, 2017 Share Posted May 2, 2017 9 minutes ago, BubbaCrawfish said: 0.23? ill try it Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now