Jump to content

help with playing other peoples' PGM in single player?


Recommended Posts

Hello,

I was curious to check out some of the PGMs that used to run on official servers which were poop-canned upon launch. I'm having trouble using the codes that have been posted for them. I put this code (which came from here):

PGMapName=ProceduralARK201619999999
PGTerrainPropertiesString=MapSeed=365;LandscapeRadius=1.0;Water Frequency=1.012074;Mountains Frequency=12.88525;Mountains Slope=0.978277;MountainsHeight=0.847633;Turbulence Power=0.0125;Shore Slope=1.0;WaterLevel=-0.72;GrassDensity=1.2;JungleGrassDensity=0.04;ErosionIterations=200000;OceanFloorLevel=-1.0;SnowBiomeSize=0.365831;RWBiomeSize=0.179932;MountainBiomeStart=-0.509294;MountainsTreeDensity=0.03;JungleBiomeStart=-0.628567;IslandBorderCurveExp=4.0;MaxSawnPointHeight=0.1;SnowGrassDensity=0.2;MountainGrassDensity=0.07;SnowMountainGrassDensity=0.15;UnderwaterObjectsDensity=0.5;SnowMountainsTreeDensity=0.02;TreeDensity=0.008;JungleTreeDensity=0.8;RedWoodTreeDensity=0.2;SnowTreeDensity=1.2;RedwoodGrassDensity=0.12;ShoreTreeDensity=0.04;SnowShoreTreeDensity=0.025;DeepWaterBiomesDepth=-0.24;InlandWaterObjectsDensity=0.5;ShorelineStartOffset=0.01;ShorelineThickness=0.003;TerrainScaleMultiplier=(X=1.0f,Y=1.0f,Z=1.0f);SnowBiomeLocation=(X=0.2f,Y=0.2f);RWForestBiomeLocation=(X=0.5f,Y=0.5f);NorthRegion1Start=(X=0.25f,Y=0.0f);NorthRegion1End=(X=0.416f,Y=0.5f);NorthRegion2Start=(X=0.416f,Y=0.0f);NorthRegion2End=(X=0.582f,Y=0.5f);NorthRegion3Start=(X=0.582f,Y=0.0f);NorthRegion3End=(X=0.75f,Y=0.0f);SouthRegion1Start=(X=0.25f,Y=0.5f);SouthRegion1End=(X=0.416f,Y=1.0f);SouthRegion2Start=(X=0.416f,Y=0.5f);SouthRegion2End=(X=0.582f,Y=1.0f);SouthRegion3Start=(X=0.582f,Y=0.5f);SouthRegion3End=(X=0.75f,Y=1.0f);EastRegion1Start=(X=0.75f,Y=0.0f);EastRegion1End=(X=1.0f,Y=0.333f);EastRegion2Start=(X=0.75f,Y=0.333f);EastRegion2End=(X=1.0f,Y=0.666f);EastRegion3Start=(X=0.75f,Y=0.666f);EastRegion3End=(X=1.0f,Y=1.0f);WestRegion1Start=(X=0.0f,Y=0.0f);WestRegion1End=(X=0.25f,Y=0.333f);WestRegion2Start=(X=0.0f,Y=0.333f);WestRegion2End=(X=0.25f,Y=0.666f);WestRegion3Start=(X=0.0f,Y=0.666f);WestRegion3End=(X=0.25f,Y=1.0f)

in my \Saved\Config\WindowsNoEditor\Game.ini file but I can't see these settings showing up on the "create procedural ARK" screen (but I guess that isn't right). I also tried using "PGLastUsedSettings" like this instead:

PGLastUsedSettings=MapSeed=365;LandscapeRadius=1.0;Water Frequency=1.012074;Mountains Frequency=12.88525;Mountains Slope=0.978277;MountainsHeight=0.847633;Turbulence Power=0.0125;Shore Slope=1.0;WaterLevel=-0.72;GrassDensity=1.2;JungleGrassDensity=0.04;ErosionIterations=200000;OceanFloorLevel=-1.0;SnowBiomeSize=0.365831;RWBiomeSize=0.179932;MountainBiomeStart=-0.509294;MountainsTreeDensity=0.03;JungleBiomeStart=-0.628567;IslandBorderCurveExp=4.0;MaxSawnPointHeight=0.1;SnowGrassDensity=0.2;MountainGrassDensity=0.07;SnowMountainGrassDensity=0.15;UnderwaterObjectsDensity=0.5;SnowMountainsTreeDensity=0.02;TreeDensity=0.008;JungleTreeDensity=0.8;RedWoodTreeDensity=0.2;SnowTreeDensity=1.2;RedwoodGrassDensity=0.12;ShoreTreeDensity=0.04;SnowShoreTreeDensity=0.025;DeepWaterBiomesDepth=-0.24;InlandWaterObjectsDensity=0.5;ShorelineStartOffset=0.01;ShorelineThickness=0.003;TerrainScaleMultiplier=(X=1.0f,Y=1.0f,Z=1.0f);SnowBiomeLocation=(X=0.2f,Y=0.2f);RWForestBiomeLocation=(X=0.5f,Y=0.5f);NorthRegion1Start=(X=0.25f,Y=0.0f);NorthRegion1End=(X=0.416f,Y=0.5f);NorthRegion2Start=(X=0.416f,Y=0.0f);NorthRegion2End=(X=0.582f,Y=0.5f);NorthRegion3Start=(X=0.582f,Y=0.0f);NorthRegion3End=(X=0.75f,Y=0.0f);SouthRegion1Start=(X=0.25f,Y=0.5f);SouthRegion1End=(X=0.416f,Y=1.0f);SouthRegion2Start=(X=0.416f,Y=0.5f);SouthRegion2End=(X=0.582f,Y=1.0f);SouthRegion3Start=(X=0.582f,Y=0.5f);SouthRegion3End=(X=0.75f,Y=1.0f);EastRegion1Start=(X=0.75f,Y=0.0f);EastRegion1End=(X=1.0f,Y=0.333f);EastRegion2Start=(X=0.75f,Y=0.333f);EastRegion2End=(X=1.0f,Y=0.666f);EastRegion3Start=(X=0.75f,Y=0.666f);EastRegion3End=(X=1.0f,Y=1.0f);WestRegion1Start=(X=0.0f,Y=0.0f);WestRegion1End=(X=0.25f,Y=0.333f);WestRegion2Start=(X=0.0f,Y=0.333f);WestRegion2End=(X=0.25f,Y=0.666f);WestRegion3Start=(X=0.0f,Y=0.666f);WestRegion3End=(X=0.25f,Y=1.0f)

but this didn't appear on the create screen, either.

When the "create procedural ark" settings are reverted to default, the line says PGLastUsedSettings_v2 instead. I tried to manually append the code above with "_v2" but that only crashes the game when I click on "create procedural ark"

Does anyone know what I'm doing wrong and how I can do it right, please?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...