Malinja Posted June 15, 2017 Share Posted June 15, 2017 MatingIntervalMultiplier=0.01 EggHatchSpeedMultiplier=150 BabyMatureSpeedMultiplier=40 BabyImprintingStatScaleMultiplier=5.0 BabyCuddleIntervalMultiplier=0.1 BabyCuddleGracePeriodMultiplier=0,1 Can someone help me with these settings? It takes 9 days for imprinting on my server. I want imprint every 3 min and want them to grop up in 30 mins :-) Tried to google it, but im very new to having an server and i dont want to make 10 restarts to adjust them, since i got 30 players online. Link to comment Share on other sites More sharing options...
s710 Posted June 15, 2017 Share Posted June 15, 2017 Take a look at http://ark.gamepedia.com/Breeding#Times_for_Breeding You will see that every dino has different times for hatching and maturation. Those times are affected by the multipliers, so it is not possible to have every dino grow up in 30 mins, because the base time is different. For the options: MatingIntervalMultiplier - affects how soon you can mate dinos again after mating. Base mating interval is 18:00-48:00 (random), apply the MatingIntervalMultiplier to get the new interval. E.g. a setting of MatingIntervalMultiplier=0.1 will result in a 1h48min - 4h48min intervall. EggHatchSpeedMultiplier - as the name says, affects how quickly eggs will hatch. Again look at http://ark.gamepedia.com/Breeding#Times_for_Breeding, in the incubation section the time column will give you the hatch time for a dino, e.g. 5 hours for a rex. I have a setting of EggHatchSpeedMultiplier=10, which makes rexes hatch after 30 minutes. BabyMatureSpeedMultiplier - affects how quickly babies will grow up. According to the breeding times, a rex will roughly take 92 hours. I have a setting of BabyMatureSpeedMultiplier=10 which makes it go ten times faster, resulting in a duration of roughly 9 hours. For the other options, you can change the cuddle interval so you get imprinting bonuses more often - but they will have a smaller percentage. The default interval is a random value between 3 and 4 hours, and the % you get with each imprint is calculated as the max (4 hours) divided by the total maturation time. So decreasing the cuddle interval (= setting a value lower than 1, which is the default) makes care taking happen more often, but the % you get will get smaller. There is a lot of math behind it, and it cannot be configured so that all dinos grow at the same speed. It will always be different. So best you pick a dino (e. g. rex), and think about the desired breeding/maturation times, and set the multipliers accordingly. Hope this helps. Link to comment Share on other sites More sharing options...
Malinja Posted June 19, 2017 Author Share Posted June 19, 2017 BabyImprintingStatScaleMultiplier is that the stat that decide the % on the inprint? I want to give wywerns 20% each time. how do i change it to give more? lower or higher? i have been working on these settings for days whithout getting an answer that i understand tbh. Im not very good in english or math, i give up soon. Non of the guids help alot Link to comment Share on other sites More sharing options...
andi79h Posted June 20, 2017 Share Posted June 20, 2017 On 19.6.2017 at 9:21 PM, Malinja said: BabyImprintingStatScaleMultiplier is that the stat that decide the % on the inprint? I want to give wywerns 20% each time. how do i change it to give more? lower or higher? i have been working on these settings for days whithout getting an answer that i understand tbh. Im not very good in english or math, i give up soon. Non of the guids help alot For imprinting wyverns at 20% each and given settings in the first post, you should change BabyCuddleIntervalMultiplier to 0.1156 Cheers Link to comment Share on other sites More sharing options...
Wildclaws Posted November 9, 2017 Share Posted November 9, 2017 On 6/21/2017 at 1:34 AM, andi79h said: For imprinting wyverns at 20% each and given settings in the first post, you should change BabyCuddleIntervalMultiplier to 0.1156 Cheers You dont happen to have that XL file laying around? If you dont mind, i would love a "copy", so i can calculate my own server Link to comment Share on other sites More sharing options...
Acij Posted January 9, 2018 Share Posted January 9, 2018 On 6/15/2017 at 8:23 AM, s710 said: Take a look at http://ark.gamepedia.com/Breeding#Times_for_Breeding You will see that every dino has different times for hatching and maturation. Those times are affected by the multipliers, so it is not possible to have every dino grow up in 30 mins, because the base time is different. For the options: MatingIntervalMultiplier - affects how soon you can mate dinos again after mating. Base mating interval is 18:00-48:00 (random), apply the MatingIntervalMultiplier to get the new interval. E.g. a setting of MatingIntervalMultiplier=0.1 will result in a 1h48min - 4h48min intervall. EggHatchSpeedMultiplier - as the name says, affects how quickly eggs will hatch. Again look at http://ark.gamepedia.com/Breeding#Times_for_Breeding, in the incubation section the time column will give you the hatch time for a dino, e.g. 5 hours for a rex. I have a setting of EggHatchSpeedMultiplier=10, which makes rexes hatch after 30 minutes. BabyMatureSpeedMultiplier - affects how quickly babies will grow up. According to the breeding times, a rex will roughly take 92 hours. I have a setting of BabyMatureSpeedMultiplier=10 which makes it go ten times faster, resulting in a duration of roughly 9 hours. For the other options, you can change the cuddle interval so you get imprinting bonuses more often - but they will have a smaller percentage. The default interval is a random value between 3 and 4 hours, and the % you get with each imprint is calculated as the max (4 hours) divided by the total maturation time. So decreasing the cuddle interval (= setting a value lower than 1, which is the default) makes care taking happen more often, but the % you get will get smaller. There is a lot of math behind it, and it cannot be configured so that all dinos grow at the same speed. It will always be different. So best you pick a dino (e. g. rex), and think about the desired breeding/maturation times, and set the multipliers accordingly. Hope this helps. By any chance, do you happen to remember what you put for Cuddle Interval? I'm setting the Baby Mature Speed Multiplier to 10 and I would like to have the same Cuddle Intervals as it would have as default, thanks. Link to comment Share on other sites More sharing options...
s710 Posted January 10, 2018 Share Posted January 10, 2018 20 hours ago, Acij said: By any chance, do you happen to remember what you put for Cuddle Interval? I'm setting the Baby Mature Speed Multiplier to 10 and I would like to have the same Cuddle Intervals as it would have as default, thanks. Please see my last comment here: I have never set/changed the cuddle interval. Link to comment Share on other sites More sharing options...
vXanxiety Posted June 8, 2018 Share Posted June 8, 2018 I have 45 baby mature speed can someone help me and fix the server settings to at least 25% imprint everytime Link to comment Share on other sites More sharing options...
Jmend12 Posted December 2, 2018 Share Posted December 2, 2018 On 6/20/2017 at 4:34 PM, andi79h said: For imprinting wyverns at 20% each and given settings in the first post, you should change BabyCuddleIntervalMultiplier to 0.1156 Cheers this worked for me but how did you get the number exactly , i wanna get my wyvern to get 15 or 16 % Link to comment Share on other sites More sharing options...
psnconvict1337 Posted February 17, 2019 Share Posted February 17, 2019 On 12/1/2018 at 11:58 PM, Jmend12 said: this worked for me but how did you get the number exactly , i wanna get my wyvern to get 15 or 16 % how do i get this excel spreadsheet? Link to comment Share on other sites More sharing options...
Zesh Posted March 14, 2019 Share Posted March 14, 2019 I'd also like to request this spreadsheet. Link to comment Share on other sites More sharing options...
VietPlus Posted March 31, 2019 Share Posted March 31, 2019 On 2/18/2019 at 4:01 AM, psnconvict1337 said: how do i get this excel spreadsheet? I'd also like to request this spreadsheet. Link to comment Share on other sites More sharing options...
Lordkrsna1 Posted June 16, 2019 Share Posted June 16, 2019 How can i get a hold of this spreadsheet as well? Link to comment Share on other sites More sharing options...
Securidaca Posted June 28, 2019 Share Posted June 28, 2019 How can i get a hold of this spreadsheet as well? Link to comment Share on other sites More sharing options...
Darkprince388 Posted July 20, 2019 Share Posted July 20, 2019 Perhaps someone could explain how and why to get the growth sped and imprint to match for every dino. Considering the Devs do it perfectlyevery time they have an event that gives 3 times maturation. Or is it really that the Devs are to lazy to fix this setting after a couple years have gone by. As an example. I set growth to 10 and my friends can get a raptor to 100 bur for their rex I have to us commands to give it 100. I'm looking for anyone who can give a straight answer. Not repeat the settings word for word. Van it be done or no. P.S. not asking for all dino to raise in the same amount of time. Just to make clear. Link to comment Share on other sites More sharing options...
MagnusFalcon Posted October 9, 2019 Share Posted October 9, 2019 As far as my calculations go, i've found that the closest multiplier for all Dino Type 100% imprint is "y = 1/x" or "y = x^(-1)". BabyCuddleIntervalMultiplier = 1 / BabyMatureSpeedMultiplier 0.2 = 1 / 5 Times 0.1 = 1 / 10 Times 0.04 = 1 / 25 Times Link to comment Share on other sites More sharing options...
SaintNexcis Posted April 6, 2020 Share Posted April 6, 2020 Anyone know how to get a copy of the spreadsheet? Link to comment Share on other sites More sharing options...
ButtonMasherXD Posted June 12, 2020 Share Posted June 12, 2020 On 10/9/2019 at 12:45 PM, MagnusFalcon said: As far as my calculations go, i've found that the closest multiplier for all Dino Type 100% imprint is "y = 1/x" or "y = x^(-1)". BabyCuddleIntervalMultiplier = 1 / BabyMatureSpeedMultiplier 0.2 = 1 / 5 Times 0.1 = 1 / 10 Times 0.04 = 1 / 25 Times So what your saying is, if I put baby cuddle multiplier to 1, and mature speed to 0.2 the baby will need to imprinted on 5 times? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.