CeytosSpleen Posted March 17, 2017 Share Posted March 17, 2017 Hello, I don't know anything about breeding and first sorry for my poor english. Breeding multiplier is x3 on my server: EggHatchSpeedMultiplier=3.0 BabyMatureSpeedMultiplier=3.0 But what should I put to make it possible to imprint all dino 100% ? (without making it too easy or having to cuddle every minute) BabyCuddleIntervalMultiplier=??? BabyCuddleGracePeriodMultiplier=??? BabyCuddleLoseImprintQualitySpeedMultiplier=??? Thanks, best regard, Link to comment Share on other sites More sharing options...
LadyCrescent Posted March 17, 2017 Share Posted March 17, 2017 If you're on console, the imprinting multipliers are broken...they don't change anything, so it will always be between three and four hours that your baby will need imprinting. But, if 100% imprinting is important to you, I can actually help! I've done a ton of experiments to find the sweet spot for faster mature time but allowance for enough imprinting to get 100%. If you set your baby maturation to BabyMatureSpeedMultiplier=2.1 you'll get enough imprinting for 100% at double maturation rate. The number needs to be precisely 2.1. Any other number will mess it up. I hope this helps. Link to comment Share on other sites More sharing options...
CeytosSpleen Posted March 17, 2017 Author Share Posted March 17, 2017 Yeah it really help, but there is a way whitout put BabyMatureSpeedMultiplier to 2.1 and stay x3 ? Btw I'm on pc. Link to comment Share on other sites More sharing options...
ilShadow Posted March 17, 2017 Share Posted March 17, 2017 On PC you should be able to set the mature at 3x and the cuddle timer to .7 (i think) you may need to do testing on your own to figure it out. So the cuddle multiplier is inverse, the lower it goes the faster it is. Link to comment Share on other sites More sharing options...
heiser Posted March 17, 2017 Share Posted March 17, 2017 Try 0.33 Link to comment Share on other sites More sharing options...
LadyCrescent Posted March 17, 2017 Share Posted March 17, 2017 Oh, okay, then there probably is a way to adjust the imprinting multipliers. But I only moved to PC two weeks ago, so I haven't gotten far enough in my game to have to figure all that out. I hope someone from PC can give you some answers. Good luck! Link to comment Share on other sites More sharing options...
CeytosSpleen Posted March 17, 2017 Author Share Posted March 17, 2017 Anyway thanks a lot dude ! But... so, 0.7 ? Otherwise another guy tel me 0.333 also on steam, but with hight chance to get a 99.9% (really frustrating) It's the case or it's really reaches 100% ? Anyway I will try, thanks Link to comment Share on other sites More sharing options...
heiser Posted March 17, 2017 Share Posted March 17, 2017 You are making the maturation 3 times faster, so you want to cut the imprint by 1/3. Hence the 0.33 You can also do something like 0.3 or 0.25 to always get 100% with leftover time. But I've never messed with these settings so this is all just theory. Trial and error is your friend. Link to comment Share on other sites More sharing options...
CeytosSpleen Posted March 17, 2017 Author Share Posted March 17, 2017 ok, ty, really thanks a lot ! Link to comment Share on other sites More sharing options...
vanyelxp5 Posted March 17, 2017 Share Posted March 17, 2017 Increasing the speed at which they grow up also increases the amount you get from imprinting. The problem is that shorter raises (like turtles, Ankys, raptors etc.) don't have enough time to get the required number of imprints on average. For a Raptor at 3x maturation speed, you need 4 imprints. But in order to get 4 imprints, they have to all be at the lower end (3 hours and 5 minutes) You may have to experiment a bit, but setting your interval multiplier to 0.75 should be sufficient to ensure that most things get to 100% without leaving you with a ton of extra time at the end. If you want that extra time, then by all means, go for the 0.33 multiplier. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.