Maniac Posted December 30, 2016 Share Posted December 30, 2016 PGTerrainPropertiesString=MapSeed=561 LandscapeRadius=1.0 Water Frequency=.5 Mountains Frequency=.5 Mountains Slope=1 MountainsHeight=1.25 Turbulence Power=0.000000005 Shore Slope=1.5 WaterLevel=-0.75 GrassDensity=1.25 JungleGrassDensity=0.77 ErosionIterations=-200000 OceanFloorLevel=-1.25 SnowBiomeSize=0.05 RWBiomeSize=.75 MountainBiomeStart=0.7 MountainsTreeDensity=0.01 JungleBiomeStart=0.2 IslandBorderCurveExp=4.0 MaxSawnPointHeight=-0.3 SnowGrassDensity=0.55 MountainGrassDensity=0.25 SnowMountainGrassDensity=0.15 UnderwaterObjectsDensity=0.5 SnowMountainsTreeDensity=0.01 TreeDensity=0.03 JungleTreeDensity=0.96 RedWoodTreeDensity=0.55 SnowTreeDensity=1.0 RedwoodGrassDensity=0.1 ShoreTreeDensity=0.05 SnowShoreTreeDensity=0.025 DeepWaterBiomesDepth=-0.15 InlandWaterObjectsDensity=0.5 ShorelineStartOffset=0.04 ShorelineThickness=0.001 TerrainScaleMultiplier=(X=1.0f,Y=1.0f,Z=1.0f) SnowBiomeLocation=(X=0.2f,Y=0.2f) RWForestBiomeLocation=(X=0.5f,Y=0.5f) NorthRegion1Start=(X=0.25f,Y=0.0f) NorthRegion1End=(X=0.416f,Y=0.5f) NorthRegion2Start=(X=0.416f,Y=0.0f) NorthRegion2End=(X=0.582f,Y=0.5f) NorthRegion3Start=(X=0.582f,Y=0.0f) NorthRegion3End=(X=0.75f,Y=0.0f) SouthRegion1Start=(X=0.25f,Y=0.5f) SouthRegion1End=(X=0.416f,Y=1.0f) SouthRegion2Start=(X=0.416f,Y=0.5f) SouthRegion2End=(X=0.582f,Y=1.0f) SouthRegion3Start=(X=0.582f,Y=0.5f) SouthRegion3End=(X=0.75f,Y=1.0f) EastRegion1Start=(X=0.75f,Y=0.0f) EastRegion1End=(X=1.0f,Y=0.333f) EastRegion2Start=(X=0.75f,Y=0.333f) EastRegion2End=(X=1.0f,Y=0.666f) EastRegion3Start=(X=0.75f,Y=0.666f) EastRegion3End=(X=1.0f,Y=1.0f) WestRegion1Start=(X=0.0f,Y=0.0f) WestRegion1End=(X=0.25f,Y=0.333f) WestRegion2Start=(X=0.0f,Y=0.333f) WestRegion2End=(X=0.25f,Y=0.666f) WestRegion3Start=(X=0.0f,Y=0.666f) WestRegion3End=(X=0.25f,Y=1.0f) so theres the pertanent info for my pgm. The problem im running into is no matter what i change slope, or erosioniteriations to, i find that in the jungle areas, or at base of mountains, the ground is simply very choppy and rutted. Basically if u run over it, youll get stuck, dinos get stuck, its simply a nightmare and ive spent 2 days tryin to figure this out. Any suggestions would be much appreciated. Link to comment Share on other sites More sharing options...
Redkiller Posted December 31, 2016 Share Posted December 31, 2016 The erosion proprieties are a clusterf|_|ck. My guess is you need to set your deposition strength lower. I'd also set your other erosion values lower as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.