PGM rough terrain

[Maniac]

PGTerrainPropertiesString=MapSeed=561
LandscapeRadius=1.0
Water Frequency=.5
Mountains Frequency=.5
Mountains Slope=1
MountainsHeight=1.25
Turbulence Power=0.000000005
Shore Slope=1.5
WaterLevel=-0.75
GrassDensity=1.25
JungleGrassDensity=0.77
ErosionIterations=-200000
OceanFloorLevel=-1.25
SnowBiomeSize=0.05
RWBiomeSize=.75
MountainBiomeStart=0.7
MountainsTreeDensity=0.01
JungleBiomeStart=0.2
IslandBorderCurveExp=4.0
MaxSawnPointHeight=-0.3
SnowGrassDensity=0.55
MountainGrassDensity=0.25
SnowMountainGrassDensity=0.15
UnderwaterObjectsDensity=0.5
SnowMountainsTreeDensity=0.01
TreeDensity=0.03
JungleTreeDensity=0.96
RedWoodTreeDensity=0.55
SnowTreeDensity=1.0
RedwoodGrassDensity=0.1
ShoreTreeDensity=0.05
SnowShoreTreeDensity=0.025
DeepWaterBiomesDepth=-0.15
InlandWaterObjectsDensity=0.5
ShorelineStartOffset=0.04
ShorelineThickness=0.001
TerrainScaleMultiplier=(X=1.0f,Y=1.0f,Z=1.0f)
SnowBiomeLocation=(X=0.2f,Y=0.2f)
RWForestBiomeLocation=(X=0.5f,Y=0.5f)
NorthRegion1Start=(X=0.25f,Y=0.0f)
NorthRegion1End=(X=0.416f,Y=0.5f)
NorthRegion2Start=(X=0.416f,Y=0.0f)
NorthRegion2End=(X=0.582f,Y=0.5f)
NorthRegion3Start=(X=0.582f,Y=0.0f)
NorthRegion3End=(X=0.75f,Y=0.0f)
SouthRegion1Start=(X=0.25f,Y=0.5f)
SouthRegion1End=(X=0.416f,Y=1.0f)
SouthRegion2Start=(X=0.416f,Y=0.5f)
SouthRegion2End=(X=0.582f,Y=1.0f)
SouthRegion3Start=(X=0.582f,Y=0.5f)
SouthRegion3End=(X=0.75f,Y=1.0f)
EastRegion1Start=(X=0.75f,Y=0.0f)
EastRegion1End=(X=1.0f,Y=0.333f)
EastRegion2Start=(X=0.75f,Y=0.333f)
EastRegion2End=(X=1.0f,Y=0.666f)
EastRegion3Start=(X=0.75f,Y=0.666f)
EastRegion3End=(X=1.0f,Y=1.0f)
WestRegion1Start=(X=0.0f,Y=0.0f)
WestRegion1End=(X=0.25f,Y=0.333f)
WestRegion2Start=(X=0.0f,Y=0.333f)
WestRegion2End=(X=0.25f,Y=0.666f)
WestRegion3Start=(X=0.0f,Y=0.666f)
WestRegion3End=(X=0.25f,Y=1.0f)

 

 

so theres the pertanent info for my pgm. The problem im running into is no matter what i change slope, or erosioniteriations to, i find that in the jungle areas, or at base of mountains, the ground is simply very choppy and rutted. Basically if u run  over it, youll get stuck, dinos get stuck, its simply a nightmare and ive spent 2 days tryin to figure this out. Any suggestions would be much appreciated.

[Redkiller]

The erosion proprieties are a clusterf|_|ck. My guess is you need to set your deposition strength lower. I'd also set your other erosion values lower as well.