Tijz Posted November 29, 2016 Share Posted November 29, 2016 Can someone help me to explain breeding. I thought it was only able to breed at highest lvl 225, Since base lvl can be 225 when perfect tamed. Some other guy on my server can breed 239. Can someone explain me? Link to comment Share on other sites More sharing options...
Captain Awesome Posted December 1, 2016 Share Posted December 1, 2016 On 11/29/2016 at 11:14 PM, Tijz said: Can someone help me to explain breeding. I thought it was only able to breed at highest lvl 225, Since base lvl can be 225 when perfect tamed. Some other guy on my server can breed 239. Can someone explain me? There can be a chance for the off spring to be a higher level than the parents. Not sure exactly how it works, nor does it make much sense, but that's about the size of it. Link to comment Share on other sites More sharing options...
m4Marci Posted December 1, 2016 Share Posted December 1, 2016 Max level is 150 (wild) on the center, so it's also possible they brought over tames. Link to comment Share on other sites More sharing options...
Napsterfelon Posted December 5, 2016 Share Posted December 5, 2016 The breeding is a collection of levels. So if you have a perfect tame with high health and low damage mating with a perfect tame with low health and high damager you can get a child with high health and high damage. Making it a higher than perfect tame level. You might also get the opposite, a low health and low damage child. Mostly you just get a same level child. Just wait for a random mutation to hit your dino and get a super damage buff. Link to comment Share on other sites More sharing options...
Velathir Posted January 16, 2017 Share Posted January 16, 2017 It's a lot of information to condense into a single post, I would recommend reading this page in it's entirety, but the relevant section is linked for you: http://ark.gamepedia.com/Breeding#Example Basically the 'level' of a creature is a figure representing all the level-ups it is made up of. These distributions of stats are determined randomly when the creature is spawned. In theory you could run across two level 100 Dodos Male, with 50 levels spent in health, giving it 1000 health (made up figure), Female, with 50 levels spent in Melee (giving it 300% melee, also fiction) If you breed these two level 100's together, you have a chance of getting a baby who inherits both the 1k health pool and 300% melee, the level representation of the baby would then be 150 50 random levels 50 levels in health (from Father) 50 levels in melee (from Mother) Breeding is incredibly powerful and lets players 'make' creatures with combinations of stats/levels that would be impossible to acquire through taming alone. Though it requires a fair amount of dedication, time, and luck to make these kinds of things happen. A typical approach for a breeder would be to find/tame a high level creature with a very high base health, and then find a corresponding level/tame with really high melee or carry weight, and then breed to produce an offspring with both stats. Many professional breeders will often times do combinations of 3-4 stats overall, but this can require many generations to produce a so called 'perfect breeding'. Honestly, I'm skipping a lot of details here, because there are a ton more factors in play, I would encourage reading the article for more information. Link to comment Share on other sites More sharing options...
Tijz Posted January 17, 2017 Author Share Posted January 17, 2017 17 hours ago, Velathir said: It's a lot of information to condense into a single post, I would recommend reading this page in it's entirety, but the relevant section is linked for you: http://ark.gamepedia.com/Breeding#Example Basically the 'level' of a creature is a figure representing all the level-ups it is made up of. These distributions of stats are determined randomly when the creature is spawned. In theory you could run across two level 100 Dodos Male, with 50 levels spent in health, giving it 1000 health (made up figure), Female, with 50 levels spent in Melee (giving it 300% melee, also fiction) If you breed these two level 100's together, you have a chance of getting a baby who inherits both the 1k health pool and 300% melee, the level representation of the baby would then be 150 50 random levels 50 levels in health (from Father) 50 levels in melee (from Mother) Breeding is incredibly powerful and lets players 'make' creatures with combinations of stats/levels that would be impossible to acquire through taming alone. Though it requires a fair amount of dedication, time, and luck to make these kinds of things happen. A typical approach for a breeder would be to find/tame a high level creature with a very high base health, and then find a corresponding level/tame with really high melee or carry weight, and then breed to produce an offspring with both stats. Many professional breeders will often times do combinations of 3-4 stats overall, but this can require many generations to produce a so called 'perfect breeding'. Honestly, I'm skipping a lot of details here, because there are a ton more factors in play, I would encourage reading the article for more information. Ive heard people about breeding 300+ levels? Is this even possbile, if yes how? Link to comment Share on other sites More sharing options...
Velathir Posted January 17, 2017 Share Posted January 17, 2017 9 hours ago, Tijz said: Ive heard people about breeding 300+ levels? Is this even possbile, if yes how? Yes, it's possible, but very very difficult. Essentially you take what I said above about combining different parents to get a child that inherits both stats and then just do it for every stat every stat you have patience for. Lets say you start out with some fresh wild tames, and miraculously, they are all incredibly strong in a separate unique stat: Pteranodon A - Kibble tamed at level 225 has high health Pteranodon B - Kibble tamed at level 225 has high damage Pteranodon C - Kibble tamed at level 225 has high stamina First you would breed A & B together repeatedly until you got a child (X) that inherited both high health/damage, you would then breed Ptera C & X together until you got one with High Health/Damage (from X) and High Stamina (from C). Essentially grafting on the stronger stat into the child, each time you successfully breed in the attribute, the overall level of the child (from breeding) would get higher. Now, this is a very simple example, but it gets complicated quickly: You are going to need to knock unconscious a lot of wild dinosaurs at as close to max level as possible. Check their stats and then tame them if applicable. Most dino's have a pretty average distribution of stats, finding just one with a standout stat will take a lot of hunting. When breeding, the child has a 70% chance of inheriting the higher stat from either parent. Meaning, if you were just trying to graft together 2 stats. Say, a high health/high melee combination together, you have better than average chances you will be successful in around 3 breedings max. However, the odds of getting that 70% on 4, or maybe 5 stats all at once? This could take a dozen breedings It may seem silly, but breeding requires a male and female (Ark is still pretty regressive like that, maybe a Tek Tier IVF enhancement is needed? ) This means, when you breed Pteranodon A & B above to get X, well if X turns out to be a male and Ptera C is also a male, you can't breed in that third stat and will likely have to breed A & B again, not just to get the stats, but the gender you need as well! So now you have another variable in play, getting the rights stats into the right gender. Often times a breeder would keep child X, on the off chance they could breed Ptera C with a future Ptera D (perhaps one with high Weight for instance) and that child is a female, then breeding X with the child of C & D Now for most tames, you will likely favor Health & Damage first, Stamina & Weight second, Oxygen/Food are typically seen as unimportant stats. However, getting a tame with 'high levels' in Oxygen and breeding this into your dino will increase its level, these are sometimes referred to as 'vanity levels', as they do not actually affect the combat/utility capability of your creature, but does make it's overall level higher. So here's the punchline: 'Speed' doesn't count, as there is no bonus associated with this stat So to get to the 300 mark, you need to find 6 individuals, each with a unique 50+ pts dumped into Health/Stamina/Oxygen/Food/Melee/Weight All of that will get you a 300 bred creature It will likely take hundreds of tames It will take dozens of breedings (likely triple-digits) The closer you get to max, the slower it will go For instance, in my tribe, we knocked out every Rex we came across for an afternoon on The Center, we kept 3 220+ tames: Good health (9k base, 35pts) Good damage (346% melee, 49 pts) Meh stamina (1400 I think?, 30 pts) We bred those three together to create one Rex with all 3 stats, he's a male and I believe he bred out at around level 230. You can see how far a cry from level 300 this is, we would need much higher stats in our tames and many, many more breedings to even get close to breaking level 260/270. We live on a private dedicated server, so I likely will not be chasing a perfect breed, we just wanted a solid high-level all around Rex, and this fits the bill very well for us. Some people treat level 300 like the baseline for 'good/great', when in reality its a sign of an incredibly devoted breeder and a lot of time. Here's my advice if you care to have it: Breed something, anything. Just go do it. You will learn more about this process doing it than reading everything there is on it. I recommend Ptera's as a starting point It's not terribly too time-consuming Just grab your best damage and your best health Ptera's of opposite gender Don't worry about getting it perfect or right You will love the cute little bastards more than anything you found out in the wild Typically anything bred will beat the pants off anything just tamed, just wait till you find out about Imprinting Link to comment Share on other sites More sharing options...
Tijz Posted January 18, 2017 Author Share Posted January 18, 2017 11 hours ago, Velathir said: Yes, it's possible, but very very difficult. Essentially you take what I said above about combining different parents to get a child that inherits both stats and then just do it for every stat every stat you have patience for. Lets say you start out with some fresh wild tames, and miraculously, they are all incredibly strong in a separate unique stat: Pteranodon A - Kibble tamed at level 225 has high health Pteranodon B - Kibble tamed at level 225 has high damage Pteranodon C - Kibble tamed at level 225 has high stamina First you would breed A & B together repeatedly until you got a child (X) that inherited both high health/damage, you would then breed Ptera C & X together until you got one with High Health/Damage (from X) and High Stamina (from C). Essentially grafting on the stronger stat into the child, each time you successfully breed in the attribute, the overall level of the child (from breeding) would get higher. Now, this is a very simple example, but it gets complicated quickly: You are going to need to knock unconscious a lot of wild dinosaurs at as close to max level as possible. Check their stats and then tame them if applicable. Most dino's have a pretty average distribution of stats, finding just one with a standout stat will take a lot of hunting. When breeding, the child has a 70% chance of inheriting the higher stat from either parent. Meaning, if you were just trying to graft together 2 stats. Say, a high health/high melee combination together, you have better than average chances you will be successful in around 3 breedings max. However, the odds of getting that 70% on 4, or maybe 5 stats all at once? This could take a dozen breedings It may seem silly, but breeding requires a male and female (Ark is still pretty regressive like that, maybe a Tek Tier IVF enhancement is needed? ) This means, when you breed Pteranodon A & B above to get X, well if X turns out to be a male and Ptera C is also a male, you can't breed in that third stat and will likely have to breed A & B again, not just to get the stats, but the gender you need as well! So now you have another variable in play, getting the rights stats into the right gender. Often times a breeder would keep child X, on the off chance they could breed Ptera C with a future Ptera D (perhaps one with high Weight for instance) and that child is a female, then breeding X with the child of C & D Now for most tames, you will likely favor Health & Damage first, Stamina & Weight second, Oxygen/Food are typically seen as unimportant stats. However, getting a tame with 'high levels' in Oxygen and breeding this into your dino will increase its level, these are sometimes referred to as 'vanity levels', as they do not actually affect the combat/utility capability of your creature, but does make it's overall level higher. So here's the punchline: 'Speed' doesn't count, as there is no bonus associated with this stat So to get to the 300 mark, you need to find 6 individuals, each with a unique 50+ pts dumped into Health/Stamina/Oxygen/Food/Melee/Weight All of that will get you a 300 bred creature It will likely take hundreds of tames It will take dozens of breedings (likely triple-digits) The closer you get to max, the slower it will go For instance, in my tribe, we knocked out every Rex we came across for an afternoon on The Center, we kept 3 220+ tames: Good health (9k base, 35pts) Good damage (346% melee, 49 pts) Meh stamina (1400 I think?, 30 pts) We bred those three together to create one Rex with all 3 stats, he's a male and I believe he bred out at around level 230. You can see how far a cry from level 300 this is, we would need much higher stats in our tames and many, many more breedings to even get close to breaking level 260/270. We live on a private dedicated server, so I likely will not be chasing a perfect breed, we just wanted a solid high-level all around Rex, and this fits the bill very well for us. Some people treat level 300 like the baseline for 'good/great', when in reality its a sign of an incredibly devoted breeder and a lot of time. Here's my advice if you care to have it: Breed something, anything. Just go do it. You will learn more about this process doing it than reading everything there is on it. I recommend Ptera's as a starting point It's not terribly too time-consuming Just grab your best damage and your best health Ptera's of opposite gender Don't worry about getting it perfect or right You will love the cute little bastards more than anything you found out in the wild Typically anything bred will beat the pants off anything just tamed, just wait till you find out about Imprinting I have over 71 rexes and my highest breed was 238 now. Link to comment Share on other sites More sharing options...
Nb1320 Posted January 28, 2017 Share Posted January 28, 2017 We have someone breeding level 280 agents every egg, anything is possible. Link to comment Share on other sites More sharing options...
CONVlKT Posted February 1, 2017 Share Posted February 1, 2017 On 1/18/2017 at 0:22 AM, Tijz said: On 1/17/2017 at 0:51 PM, Velathir said: Yes, it's possible, but very very difficult. Essentially you take what I said above about combining different parents to get a child that inherits both stats and then just do it for every stat every stat you have patience for. Lets say you start out with some fresh wild tames, and miraculously, they are all incredibly strong in a separate unique stat: Pteranodon A - Kibble tamed at level 225 has high health Pteranodon B - Kibble tamed at level 225 has high damage Pteranodon C - Kibble tamed at level 225 has high stamina First you would breed A & B together repeatedly until you got a child (X) that inherited both high health/damage, you would then breed Ptera C & X together until you got one with High Health/Damage (from X) and High Stamina (from C). Essentially grafting on the stronger stat into the child, each time you successfully breed in the attribute, the overall level of the child (from breeding) would get higher. Now, this is a very simple example, but it gets complicated quickly: You are going to need to knock unconscious a lot of wild dinosaurs at as close to max level as possible. Check their stats and then tame them if applicable. Most dino's have a pretty average distribution of stats, finding just one with a standout stat will take a lot of hunting. When breeding, the child has a 70% chance of inheriting the higher stat from either parent. Meaning, if you were just trying to graft together 2 stats. Say, a high health/high melee combination together, you have better than average chances you will be successful in around 3 breedings max. However, the odds of getting that 70% on 4, or maybe 5 stats all at once? This could take a dozen breedings It may seem silly, but breeding requires a male and female (Ark is still pretty regressive like that, maybe a Tek Tier IVF enhancement is needed? ) This means, when you breed Pteranodon A & B above to get X, well if X turns out to be a male and Ptera C is also a male, you can't breed in that third stat and will likely have to breed A & B again, not just to get the stats, but the gender you need as well! So now you have another variable in play, getting the rights stats into the right gender. Often times a breeder would keep child X, on the off chance they could breed Ptera C with a future Ptera D (perhaps one with high Weight for instance) and that child is a female, then breeding X with the child of C & D Now for most tames, you will likely favor Health & Damage first, Stamina & Weight second, Oxygen/Food are typically seen as unimportant stats. However, getting a tame with 'high levels' in Oxygen and breeding this into your dino will increase its level, these are sometimes referred to as 'vanity levels', as they do not actually affect the combat/utility capability of your creature, but does make it's overall level higher. So here's the punchline: 'Speed' doesn't count, as there is no bonus associated with this stat So to get to the 300 mark, you need to find 6 individuals, each with a unique 50+ pts dumped into Health/Stamina/Oxygen/Food/Melee/Weight All of that will get you a 300 bred creature It will likely take hundreds of tames It will take dozens of breedings (likely triple-digits) The closer you get to max, the slower it will go For instance, in my tribe, we knocked out every Rex we came across for an afternoon on The Center, we kept 3 220+ tames: Good health (9k base, 35pts) Good damage (346% melee, 49 pts) Meh stamina (1400 I think?, 30 pts) We bred those three together to create one Rex with all 3 stats, he's a male and I believe he bred out at around level 230. You can see how far a cry from level 300 this is, we would need much higher stats in our tames and many, many more breedings to even get close to breaking level 260/270. We live on a private dedicated server, so I likely will not be chasing a perfect breed, we just wanted a solid high-level all around Rex, and this fits the bill very well for us. Some people treat level 300 like the baseline for 'good/great', when in reality its a sign of an incredibly devoted breeder and a lot of time. Here's my advice if you care to have it: Breed something, anything. Just go do it. You will learn more about this process doing it than reading everything there is on it. I recommend Ptera's as a starting point It's not terribly too time-consuming Just grab your best damage and your best health Ptera's of opposite gender Don't worry about getting it perfect or right You will love the cute little bastards more than anything you found out in the wild Typically anything bred will beat the pants off anything just tamed, just wait till you find out about Imprinting One thing to consider when you knockout an animal to check the stats is that it will not be the same as the post tame stats. Your breeding is based on post tame stats, which will have a random increase in levels on some of the stats. So you may knock it out, see health at 2000, but after tame it is 2100. The breeding stat would be 2100. edit: great post though Link to comment Share on other sites More sharing options...
Phoenixdive Posted February 2, 2017 Share Posted February 2, 2017 Not to mention imprinting, that while it does not affect levels directly, can lead to very important stat boosts. Link to comment Share on other sites More sharing options...
Velathir Posted February 2, 2017 Share Posted February 2, 2017 19 hours ago, CONVlKT said: One thing to consider when you knockout an animal to check the stats is that it will not be the same as the post tame stats. Your breeding is based on post tame stats, which will have a random increase in levels on some of the stats. So you may knock it out, see health at 2000, but after tame it is 2100. The breeding stat would be 2100. edit: great post though Excellent point, I know people are of varying opinions about "tame-everything" vs. "don't bother if it's already a low stat", I tried to leave it ambiguous by saying 'if applicable' I'm assuming that if you are on the hunt for the 300+ bred level, you probably might leave more than a few untamed though. Link to comment Share on other sites More sharing options...
Gallaryan Posted February 13, 2017 Share Posted February 13, 2017 Make some dino mutations for a high breeding lvl Link to comment Share on other sites More sharing options...
darktimebbq Posted February 13, 2017 Share Posted February 13, 2017 On 1/17/2017 at 2:51 PM, Velathir said: Yes, it's possible, but very very difficult. Essentially you take what I said above about combining different parents to get a child that inherits both stats and then just do it for every stat every stat you have patience for. Lets say you start out with some fresh wild tames, and miraculously, they are all incredibly strong in a separate unique stat: Pteranodon A - Kibble tamed at level 225 has high health Pteranodon B - Kibble tamed at level 225 has high damage Pteranodon C - Kibble tamed at level 225 has high stamina First you would breed A & B together repeatedly until you got a child (X) that inherited both high health/damage, you would then breed Ptera C & X together until you got one with High Health/Damage (from X) and High Stamina (from C). Essentially grafting on the stronger stat into the child, each time you successfully breed in the attribute, the overall level of the child (from breeding) would get higher. Now, this is a very simple example, but it gets complicated quickly: You are going to need to knock unconscious a lot of wild dinosaurs at as close to max level as possible. Check their stats and then tame them if applicable. Most dino's have a pretty average distribution of stats, finding just one with a standout stat will take a lot of hunting. When breeding, the child has a 70% chance of inheriting the higher stat from either parent. Meaning, if you were just trying to graft together 2 stats. Say, a high health/high melee combination together, you have better than average chances you will be successful in around 3 breedings max. However, the odds of getting that 70% on 4, or maybe 5 stats all at once? This could take a dozen breedings It may seem silly, but breeding requires a male and female (Ark is still pretty regressive like that, maybe a Tek Tier IVF enhancement is needed? ) This means, when you breed Pteranodon A & B above to get X, well if X turns out to be a male and Ptera C is also a male, you can't breed in that third stat and will likely have to breed A & B again, not just to get the stats, but the gender you need as well! So now you have another variable in play, getting the rights stats into the right gender. Often times a breeder would keep child X, on the off chance they could breed Ptera C with a future Ptera D (perhaps one with high Weight for instance) and that child is a female, then breeding X with the child of C & D Now for most tames, you will likely favor Health & Damage first, Stamina & Weight second, Oxygen/Food are typically seen as unimportant stats. However, getting a tame with 'high levels' in Oxygen and breeding this into your dino will increase its level, these are sometimes referred to as 'vanity levels', as they do not actually affect the combat/utility capability of your creature, but does make it's overall level higher. So here's the punchline: 'Speed' doesn't count, as there is no bonus associated with this stat So to get to the 300 mark, you need to find 6 individuals, each with a unique 50+ pts dumped into Health/Stamina/Oxygen/Food/Melee/Weight All of that will get you a 300 bred creature It will likely take hundreds of tames It will take dozens of breedings (likely triple-digits) The closer you get to max, the slower it will go For instance, in my tribe, we knocked out every Rex we came across for an afternoon on The Center, we kept 3 220+ tames: Good health (9k base, 35pts) Good damage (346% melee, 49 pts) Meh stamina (1400 I think?, 30 pts) We bred those three together to create one Rex with all 3 stats, he's a male and I believe he bred out at around level 230. You can see how far a cry from level 300 this is, we would need much higher stats in our tames and many, many more breedings to even get close to breaking level 260/270. We live on a private dedicated server, so I likely will not be chasing a perfect breed, we just wanted a solid high-level all around Rex, and this fits the bill very well for us. Some people treat level 300 like the baseline for 'good/great', when in reality its a sign of an incredibly devoted breeder and a lot of time. Here's my advice if you care to have it: Breed something, anything. Just go do it. You will learn more about this process doing it than reading everything there is on it. I recommend Ptera's as a starting point It's not terribly too time-consuming Just grab your best damage and your best health Ptera's of opposite gender Don't worry about getting it perfect or right You will love the cute little bastards more than anything you found out in the wild Typically anything bred will beat the pants off anything just tamed, just wait till you find out about Imprinting Soo much good information here. Thanks, Link to comment Share on other sites More sharing options...
Rocasaurio Posted August 3, 2017 Share Posted August 3, 2017 On 17/1/2017 at 1:51 PM, Velathir said: Yes, it's possible, but very very difficult. Essentially you take what I said above about combining different parents to get a child that inherits both stats and then just do it for every stat every stat you have patience for. Lets say you start out with some fresh wild tames, and miraculously, they are all incredibly strong in a separate unique stat: Pteranodon A - Kibble tamed at level 225 has high health Pteranodon B - Kibble tamed at level 225 has high damage Pteranodon C - Kibble tamed at level 225 has high stamina First you would breed A & B together repeatedly until you got a child (X) that inherited both high health/damage, you would then breed Ptera C & X together until you got one with High Health/Damage (from X) and High Stamina (from C). Essentially grafting on the stronger stat into the child, each time you successfully breed in the attribute, the overall level of the child (from breeding) would get higher. Now, this is a very simple example, but it gets complicated quickly: You are going to need to knock unconscious a lot of wild dinosaurs at as close to max level as possible. Check their stats and then tame them if applicable. Most dino's have a pretty average distribution of stats, finding just one with a standout stat will take a lot of hunting. When breeding, the child has a 70% chance of inheriting the higher stat from either parent. Meaning, if you were just trying to graft together 2 stats. Say, a high health/high melee combination together, you have better than average chances you will be successful in around 3 breedings max. However, the odds of getting that 70% on 4, or maybe 5 stats all at once? This could take a dozen breedings It may seem silly, but breeding requires a male and female (Ark is still pretty regressive like that, maybe a Tek Tier IVF enhancement is needed? ) This means, when you breed Pteranodon A & B above to get X, well if X turns out to be a male and Ptera C is also a male, you can't breed in that third stat and will likely have to breed A & B again, not just to get the stats, but the gender you need as well! So now you have another variable in play, getting the rights stats into the right gender. Often times a breeder would keep child X, on the off chance they could breed Ptera C with a future Ptera D (perhaps one with high Weight for instance) and that child is a female, then breeding X with the child of C & D Now for most tames, you will likely favor Health & Damage first, Stamina & Weight second, Oxygen/Food are typically seen as unimportant stats. However, getting a tame with 'high levels' in Oxygen and breeding this into your dino will increase its level, these are sometimes referred to as 'vanity levels', as they do not actually affect the combat/utility capability of your creature, but does make it's overall level higher. So here's the punchline: 'Speed' doesn't count, as there is no bonus associated with this stat So to get to the 300 mark, you need to find 6 individuals, each with a unique 50+ pts dumped into Health/Stamina/Oxygen/Food/Melee/Weight All of that will get you a 300 bred creature It will likely take hundreds of tames It will take dozens of breedings (likely triple-digits) The closer you get to max, the slower it will go For instance, in my tribe, we knocked out every Rex we came across for an afternoon on The Center, we kept 3 220+ tames: Good health (9k base, 35pts) Good damage (346% melee, 49 pts) Meh stamina (1400 I think?, 30 pts) We bred those three together to create one Rex with all 3 stats, he's a male and I believe he bred out at around level 230. You can see how far a cry from level 300 this is, we would need much higher stats in our tames and many, many more breedings to even get close to breaking level 260/270. We live on a private dedicated server, so I likely will not be chasing a perfect breed, we just wanted a solid high-level all around Rex, and this fits the bill very well for us. Some people treat level 300 like the baseline for 'good/great', when in reality its a sign of an incredibly devoted breeder and a lot of time. Here's my advice if you care to have it: Breed something, anything. Just go do it. You will learn more about this process doing it than reading everything there is on it. I recommend Ptera's as a starting point It's not terribly too time-consuming Just grab your best damage and your best health Ptera's of opposite gender Don't worry about getting it perfect or right You will love the cute little bastards more than anything you found out in the wild Typically anything bred will beat the pants off anything just tamed, just wait till you find out about Imprinting Thanks! Its so much useful information. Im in love with the breeding and you help me a lot. Link to comment Share on other sites More sharing options...
Irons Posted August 14, 2017 Share Posted August 14, 2017 I think i'm getting the breeding bug done all the building and taming and need a new focus to keep the game fresh and I believe I have found it. Thanks for the great summary now to choose the tame. Link to comment Share on other sites More sharing options...
Campi Posted August 15, 2017 Share Posted August 15, 2017 Also have a look at this Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.